Master responds to win2003 terminal failure measures

In the win2003 system, due to the needs of operation, a variety of servers are generally installed in the system. The win2003 terminal server is one of them, and it is inevitable that some problems will be encountered during the installation process. In order to enable users to better use the terminal, the experts conducted in-depth analysis on the failures encountered during the installation process and proposed corresponding solutions.

1. Common faults and handling

(1) Fault 1: When installing Windows 2003 Server, the system prompts "Invalid NetBIOS name"

(2) Second: When the server upgrades the domain, the installation of Active Directory (Active Directory) fails, the system prompts: Can not access the network location......

(3) Fault 3: Lingxin W2KRPL (Windows 2003 RPL patch After the installation is complete, restart, the system prompts to find an error, when prompted to start the remote management program " does not start the remote start service", when manually starting the remote start service in the management tool "service", the system prompts: Error 998, memory allocation is invalid.

(4) Fault 4: When creating a new configuration file, the boot record of DOS cannot be found in the configuration drop-down list (note that it is available before adding the network card)

(5) Fault 5: When installing MetaFrame 1.8a, the system prompts the following error message: MateFrame is designed to work onwindows 2003 (Network operting System Version 5.0)

(6) Fault 6: COM PORT appears when the terminal is connected to the server under DOS. The blue screen is reported incorrectly, but after logging in, it can log in to the server for normal use. After entering, the mouse cannot be used.

(7) Fault 7: When connecting to the server using IPX protocol under DOS, the following error message appears:

Connecting to 'w2k' (w2k is the connection name)

Support not available for IPX check you system configureation

(8) Fault 8: When the RPL diskless DOS workstation is connected with 256 colors 800x600, the ICA boot screen will crash and it will connect normally when it is 16 colors 640x480.

(9) Fault 9: After installing wfw311, the diskless DOS workstation cannot be started, execute to

NET START RDR /RPL:YES /FIT:YES /COMPUTERNAME:(COMPUTER_NAME) /When HIMEM: YES, the following prompt appears: General failure writing drive cAbort, Retry, Fail?

(10) Fault 10: After installing Windos32, the mouse cannot be used, but in the DOS state, it can be driven normally. It can be used under the application.

(11) Fault 11: After entering WIN2003 on the workstation, the mouse will wait for about 30 seconds to work.

(12) Fault 12: Terminal client common user account login server , "The local policy of this system does not allow you to use the interactive login " warning box, "OK", then return to the original operating system and cannot connect to the server. Previous12Next page Total 2 pages