Wndows 2008 system's powerful features and reliable security make many users come to experience, but after a period of contact, you will find that the system does not run like other windows systems So smooth, it is because windows2008 system enhances security and stability. In the default state, the system has made some special settings. Users want to make windows2008 system smoother, you can set it yourself.
1. Make the screen display smoother
Since the Windows Server 2008 system does not enable DirectX acceleration by default, in this system environment, we obviously feel that the screen content is not displayed. As smooth as before, in order to make the screen content more smooth, we can enable the DirectX acceleration function of Windows Server 2008 system as follows:
First login as a super user into Windows Server 2008 system, Right-click on the blank location in the system desktop, and click the “Personalization” command from the shortcut menu that appears, open the personalized interface of the corresponding system, and click ““ in the setup interface”. The Display Settings & rdquo; option, in the Display Properties Settings dialog box that appears, click the “Advanced Settings” button in the lower right corner to enter the Advanced Settings window of the system display properties;
Second click In the Advanced Settings window, click the “Troubleshooting” tab, and click “Select” in the corresponding option setting interface. Change the Settings button to enter the Change Settings window. Use the mouse to move the slide button to the “Complete” section at the “Hardware Acceleration” position of the settings window, and then click the “OK” button to save the above settings. Operation, so that the DirectX acceleration function of Windows Server 2008 system is successfully enabled, we can obviously feel the content on the screen is more smooth.
2, let the program run more smoothly
As a matter of fact, the server system because of its high performance, running the application in it should have a feeling of success, but when we installed Windows When running certain software or programs in the server host of the Server 2008 system, you may feel that the software or programs are not as smooth as you might think, for example, while enjoying the wonderful video information, if you use the mouse again in the IE browser. When the page content is scrolling quickly, we can very intuitively feel that there is a slight pause in the multimedia information being played. This phenomenon is actually caused by improper setting of the default parameters of the Windows Server 2008 system. To make applications like multimedia run more smoothly, we can try to set the Windows Server 2008 system to automatically prioritize applications on the system:
First in Windows Server In the 2008 system, right-click the “Computer” option in the corresponding desktop, and click the “Properties” command in the right-click menu that appears. Open the corresponding system's property setting window and click the setting window. In the side sub-pane, click the "Advanced System Settings" button to open the Advanced Properties Settings window of the Windows Server 2008 system;
Next, find the "Performance" setting item from the Advanced Properties Settings window and use the mouse. Click the “Settings” button below to enter the Windows Server 2008 System Performance Configuration page, click the “Advanced” tab on the page, and the setup page will appear automatically on the screen;
In this option setting page, we will find that Windows Server 2008 system will select "Background service" by default. The item optimization is selected, in other words, the Windows Server 2008 system will prioritize the allocation of valuable system resources to the background service to ensure that they can run normally. In order to make the Windows Server 2008 system run the application first, we should put it here. The program & rdquo; project selected, and then click the "OK" button to save the above settings. In this way, when we start the multimedia player program to enjoy the multimedia content in the Windows Server 2008 system, and use the mouse to quickly scroll the page content in the IE browser, we will not feel the multimedia screen has a pause. This means that the server system has prioritized the allocation of system resources to the application.
3, make the network login more smooth
For every network access to use the network connection, I believe that few people will expect it to slow down the Windows system startup speed Key factor. Its main impact on the Windows Server 2008 system is that the Windows system automatically attempts to log in to the LAN through the TCP/IP protocol at startup and attempts to obtain an automatic IP address from the DHCP server. However, in the default state, the Windows Server 2008 system will preferentially connect to the network through the TCP/IPv6 communication protocol. Once this network connection fails, it will attempt to re-connect the network through the TCP/IPv4 communication protocol. Obviously this network The connection process will slow down the LAN login speed of Windows Server 2008 system. In order to improve the LAN login speed of Windows Server 2008 system, we can find a way to automatically select TCP/IPv4 communication protocol for network connection operation. The following is the specific method. Implementation steps:
First login to the Windows Server 2008 system with superuser privileges, click the “Start” button from the system desktop, and click “Click” in the “Start” menu. Set the “/“network connection” command to enter the network connection list interface of the corresponding system, right-click the target local connection icon in the right mouse button, and then execute the “property" command in the right-click menu to open the target local connection. Property interface;
Second click on &ld in the property interface Quo; network & rdquo; tab, open the option settings page, in this setting page we see that the Windows Server 2008 system defaults to the TCP /IPv6 protocol, this time we should cancel the TCP /IPv6 protocol option selected state, click & ldquo;; OK & rdquo; button, then Windows Server 2008 system will log in to connect to the LAN in the future, it will not use the TCP /IPv6 protocol for network connection, after the network connection fails, then use the TCP /IPv4 communication protocol to log in to the LAN, Instead, the TCP/IPv4 communication protocol is directly used to connect to the LAN, so that we can feel the network login operation is smoother.
In addition, when the Windows Server 2008 system successfully logs into the LAN, it will automatically find out if there is a DHCP server in the LAN, so as to apply for a suitable IP address from the server, this automatic search process is also It will obviously slow down the startup speed of the server system; therefore, in order to make the Windows Server 2008 server system boot faster, we should manually assign a suitable fixed IP address to the NIC device in the corresponding system host to ensure that the Windows system does not go. Automatically find out if there is a DHCP server on the LAN. When assigning a fixed IP address to the NIC, we can follow the previous steps to open the "Network" option setting page of the target local connection, click on the TCP/IPv4 protocol option, and then click the "Properties" button. Enter the TCP/IPv4 protocol property setting dialog box, enter the appropriate IP address correctly in the dialog box, and then click the “OK” button to save the settings. Previous12Next page Total 2 pages
In the win2008 system, some users have encountered such a situation: the website ba
Win2008 system has attracted many users to experience with its superior security ad
Windows2008 has a certain operational difference with other windows operating systems. As a server t
In the win2008 system, the users of the Administrations group have high privileges.
Windows 2008 system is very popular among users because of its high security, stron