Dual System Installation Win10 Steps:
1. Open Launchpad--Enter Other--Open Boot Camp Assistant
g_2547.png&channel=6456" target="_blank">
2. Check the first and third options and press Continue.
g_2548.png&channel=6456" target="_blank">
3.ISO Image Select the Win10.iSO image path you downloaded, note: Do not place the Win10.ISO image on the USB flash drive. In the middle, the U disk will be formatted later, and placing the U disk will result in the inability to obtain the image.
g_2549.png&channel=6456" target="_blank">
g_2550.png&channel=6456" target="_blank">
g_2551.png&channel=6456" target ="_blank">
4. After clicking Continue, the Boot Camp Assistant will automatically create all Windows images and download the supported Windows drivers to the USB drive.
g_2533.png&channel=6456" target="_blank">
g_2534.png&channel=6456" target="_blank">
g_2535.png&channel=6456" target ="_blank">
g_2536.png&channel=6456" target="_blank">
5. After downloading the Windows 10 driver support, you can partition the hard drive capacity. The user is free to choose how much hard disk capacity to allocate to the Windows 10 system, or choose to split equally.
g_2539.png&channel=6456" target="_blank">
g_2540.png&channel=6456" target="_blank">
6. After the partition is completed,
Computer
will automatically restart and enter the final stage of installing Windows10 system.
g_2300.jpg&channel=6456" target="_blank">After selecting the installation language, click Next
g_2306.jpg&channel=6456" target="_blank">Enter the activation key Spoon, you can also count later.
g_2307.jpg&channel=6456" target="_blank">Install Windows 10 Professional or Home Edition as needed
g_2308.jpg&channel=6456" target ="_blank">Click Next
g_2309.jpg&channel=6456" target="_blank">Select upgraded full Windows, select custom, it will prompt failure
g_2314.jpg&channel =6456" target="_blank">The hard disk selected for installation is BootCamp (PS: Before clicking Next, you need to select Boot Camp and format it, otherwise it will prompt the installation format error)
g_2315.jpg&channel =6456" target="_blank">
g_2316.jpg&channel=6456" target="_blank">Click Next to wait for the system to automatically install.
7. After the above settings are completed, the computer will restart again and enter the personalization option of Windows. After completing, you can enter the Windows10 system.
g_2320.jpg&channel=6456" target="_blank">
g_2322.jpg&channel=6456" target="_blank">Personalization
g_2326.jpg&channel= 6456" target="_blank">This doesn't take a long time (really...waiting for a long time)
g_2329.jpg&channel=6456" target="_blank"> finally enters Windows10 System
8. After installing Windows 10 system, we will find that the font is very small, and can not connect network
and so on. This is because the Win10 driver is not installed. We only need to open the U disk that was used when we just installed Win10, enter the BootCamp folder, and click on Setup. Apple will install all the drivers for you.
g_2335.jpg&channel=6456" target="_blank">
g_2336.jpg&channel=6456" target="_blank">
g_2341.jpg&channel=6456" target ="_blank">After installing the driver, the dual system installation Win10 will be officially completed.
9. After the BootCamp setup driver is completed, the Windows10 system is officially installed.
g_25554644.png&channel=6456" target="_blank">You're done
10. After installing Win10 in dual system, when the user starts the computer, press “Option” to enter the system selection interface. Choose to start OS X or Win10. It can also be set in the OS X system - boot disk - select Win10 system or OS X system as the default boot system.
g_2542.png & channel = 6456 " target = " _blank " & gt;
g_2541.png & channel = 6456 " target = " _blank " & gt; select the default boot system
< Br>