XP system computer boot prompts to find two solutions for the new hardware wizard

When the XP system computer is turned on, it will pop up the “Found New Hardware Wizard” window, but each time you click the next step, you will find that there is no hardware at all, and you can't find the driver, but the next time you turn it on, this new hardware. The wizard window will pop up again, the specific phenomenon is as follows:

The first solution: disable the hardware
is the hardware that we want to install here, let us stop it directly It's fine to use it, but before doing this, you have to make sure you don't need to use this hardware. The operation method is as follows:
The specific steps are as follows:
1, right click on my computer & mdash; & mdash; attribute;
2, device manager & mdash; & mdash; find the exclamation point or the question mark of the hardware project or hardware The wizard prompts you to install the hardware driver, you can right click this hardware right button;
3, set to disable.
The second solution: install the hardware
Xiaobian recommended this solution, but many users may not be familiar with the driver installation, you can download a driver wizard software to assist the completion.
Related reading:
What should I do when the XP system boots up to the scroll bar? XP will restart the computer when booting to the scroll bar
Winxp system after booting blue screen and prompt error code 0x0000000f4 solution
The above is the XP system boot prompt "look for a new hardware wizard" The solution to the full content of the introduction, friends who come across the same situation, please choose a method according to your own needs!