Analysis of the cause of the failure of the blue screen restart after the Win10 system computer is connected to the mobile phone wifi hotspot and the solution

  
After successfully connecting the mobile phone WiFi hotspot, the win10 user encountered a blue screen of the computer with automatic restart, and the error code: KERNRL_SECURITY_CHECK_FAILURE, the specific phenomenon is as follows:

Fault reason analysis:
Intel network card The wireless signal transmission protocol (802.11n xitonghe.com mode) in the driver conflicts with the signal pattern of some mobile phone WIFI hotspots, which has little to do with the version of the wireless network card driver.
Workaround:
In the "Device Manager", find the wireless network card "Properties" in the "Advanced" under "The 802.11n mode" value is changed to "disabled" After saving, restart the network card to solve. As shown below:

It can be used after the change, but the maximum speed of wifi transmission is 24Mbps (about 50Mbps before the change), but it is enough to use the mobile phone hotspot. However, it is recommended to enable 802.11n mode to ensure the use of network speed under WLAN.
Remarks: If you still have not solved after the operation, you can only recommend to update the wireless network card driver again!
The above is the introduction of the failure analysis and solution of the blue screen restart after the Win10 system computer is connected to the mobile phone WiFi hotspot. Friends who have the same problem can solve the problem according to the above method!
Copyright © Windows knowledge All Rights Reserved