The reason and solution for the blue screen and the 0x0000007B error code when the Win7 system is initialized

The problem with the blue screen of Win7 system is as follows:

Solution:

1. First check whether there is a virus in the computer and check if there is a virus in the system. This STOP message usually occurs when there is a virus in the boot sector;

2, use the "repair console" to repair the drive;

3, the newly installed hard drive is removed Down;

4, if your system is equipped with IDE equipment, then set the IDE port to Primary, check the IDE device's Master, Slave, Only settings, in addition to the hard drive to remove all other IDE devices;

5. Run CHKDSK.

Note: If the system cannot start CHKDSK, you must remove the hard disk and connect it to another normal computer, then check the hard disk with the CHKDSK command;

6. Restart the computer At the start, press and hold F8 to enter the "advanced startup option", select "last time the correct configuration (advanced) & rdquo; startup item.

The above is the introduction of the blue screen and the 0x0000007B error code when the Win7 system is initialized. The friend who has the same problem can check the problem according to the above method, and then solve the problem.