Win7 ADSL network connection and dial-up connection setting method

                                                                                                                                                                                         

Win7 dial-up connection method.

1, with router
Link: ADSL MODEM——router
——computer
:

A In the Control Panel ——Network
and Sharing Center——Change Adapter Settings——Local Link Settings IP, generally set to get IP automatically, the router will automatically assign runtime IP to the computer address. As shown in the following figure 1

B, router settings

Method: Connect the router, enter the IP address of the router in Browser
(general TP-LINK is 192.168. 1.1, D-LINK is 192.168.0.1 Others can enter ipconfig in the running CMD to view the IP address of the gateway), enter the login account and password of the router (default is admin, it is best to change this password after setting), most routers The setup interface is as shown in Figure 2

The above picture shows the screenshot of the management interface of the TP-LINK router. You can enter the Internet account and password in the network parameter ——WAN port settings (your online Account and password), select automatic connection below.

C, after setting, confirm whether the router can connect to the network normally. Click on the webpage to try.

2, if the user only has a single machine at home, you do not need to use the router, you need to dial the PPOE settings on Win7,

Set as follows:

A, in In Figure 1, —— click to set up a new connection or network. Then select the first item "Connect to the Internet" (below Figure 3)

Because the machine is connected to the network, the following interface appears (below Figure 4)

We choose “ still need to set up a new connection, (below Figure 5)

Select broadband PPOE connection (below Figure 6)

win7 dial-up connection input Internet access account and password for your password and click connect to