Win8 wireless network is limited or wireless network can not connect How to do Win8 wireless network limited or no connection five solutions

, wireless signal anomaly

1, may be the problem of WiFi itself, WiFi is not connected properly, resulting in no access to the Internet;

Solution: use other mobile phones or devices to connect to WiFi try to access the Internet, exclude WiFi itself is a problem.

2, router problem, the router may be overheated or damaged;

Solution: Try rebooting the router, or restore the router to the factory settings, then dial the Internet again, and according to the setup wizard Reset WiFi, or replace the new router with a dial-up connection.

3, possible broadband arrears, resulting in no access to the Internet;

Solution: Contact the broadband customer service to confirm whether the broadband account is abnormal, such as arrears, recharge the broadband, and then dial the connection Try it.

4, WiFi name contains Chinese, causing some computers can not connect to the Internet;

Solution: If the WiFi name contains Chinese, it is recommended to modify the combination of English or English plus numbers to connect.

Second, check if the wireless network is checked. "Enable federal information processing standards for this network."

1. Open the network and sharing center, and then click the wireless network name;

2. After entering the wireless network status setting, click “Wireless Network Properties” to open the wireless network properties, then switch to the “Security Options” at the top, and then click “<quo” at the bottom. ; Advanced Settings & rdquo;;

3. Check the "Federal Information Processing Standards for this network" before you check.

Third, the NIC driver problem

may be because the NIC driver caused win8 wireless network is limited or the Internet is unstable.

Solution: Upgrade the NIC driver, you can download and install the wireless NIC driver on the official website of the notebook.

Fourth, reset the wireless network

1, open the Start menu -> connect to -> display all connections;

2, right click on the local connection (name may The difference is that the connection to the network, not the adapter) attribute, Internet T/TPC click the "Properties" button below;

3, modify the IP address, generally 192.168.0.1, sub The netmask appears automatically and is determined.

4, if you still can't return to the previous interface, click the "Advanced" button, there is a default gateway underneath, select "Add", add the default gateway 192.168.0.1

V. Reloading the NIC driver

1. "Windows logo" key + & ldquo; X & rdquo; key, open & ldquo; device manager & rdquo;;

2. In the “Network Adapter”, select the wireless network card and right click on “Properties”;

3. Click “Power Management” in the following dialog box that pops up. , remove the "Allow the computer to turn off this device to save energy" option. Then click “OK”.

The above is a description of the five solutions for Win8 wireless network limited or no connection. Friends who have the same problem can use the above methods to eliminate the problem, choose the appropriate method for the problem. solve.