How to optimize the BIOS

I believe many people still don't know what the BIOS is for. It doesn't matter. Go home and add some knowledge. Today, I mainly teach you how to optimize the BIOS of the computer system.

1. There is no standard CMOS Setup. The TYPE and MODE of the port to which the IDE device is connected are set to None.

2. Set CPU Internal Cache and External Cache to Enabled to open the CPU Level 1 and 2 cache.

3. Set System Boot Up speed to High. Make the system boot speed to high speed.

4. Set the Boot Sequence to C, A:.

5. Set Floopy Drive Seek At Boot to Disable. Make the floppy drive not detected at startup.

6. Set the About 1MB Memory Test to Disabled. No more than 1MB of memory is detected at startup.

7. Set Boot Up Floppy seek to Disabled. This will allow the floppy drive to be seeked at startup.

8. Set Video BIOS Shadow to Enabled. Map the BIOS on the graphics card to the memory to increase the display speed.

9. Set System BIOS Shadow to Enabled. Make the system BIOS map memory and improve performance.

10. Set Video BIOS Cacheable to Enable. Map the BIOS on the graphics card to the cache.

11. Set the System BIOS Cacheable to Enbaled. Map the motherboard's BIOS to the cache.

12. Set Cache Timing to Fastset.

13. Set the SDRAM CAS Latency Time to 3. Set the delay time of SDRAM. If your memory quality is not very good, setting it to 3 will greatly reduce the crash situation.

14, BIOS using VIA Apollo Pro series motherboard chip has a "DRAM CLOCK"; change its value to HCLK+33, so your memory will work at the system's FSB +33 frequency If your CPU is Celeron, the performance improvement of the system will be very obvious. If your memory is not up to expectations, you can set the value of "DRAM CLOCK" to "HOST CLK" or "ld"; HOST-33”. This is because the Apollo Pro family of chips has a unique memory asynchronous technology.

I didn't expect the optimization of the BIOS to be such a big project, but you should not be scared by these steps. The real operation is not difficult, you must have confidence.