Q: lenovo Ideapad S10, the touchpad does not respond after hibernation wakeup. A: Because the machine touchpad can only be used after waking up, the other time is normal, so the software problem is suspected, but after one key recovery, the fault remains. Uninstall the touchpad driver after reinstallation is normal. Q: Rising Sun 125F boot card LOGO, but also can not enter BiOS. A: computer boot card LOGO, according to maintenance ideas, mostly due to hard drive, CD-ROM drive, keyboard or motherboard failure caused boot card LOGO Minimize system testing in the station, only connect the motherboard, CPU, memory, screen, short-circuit boot is still the card boot card LOGO, judged that the motherboard failure caused the computer boot card LOGO, after applying for the motherboard replacement, the fault remains. Suspected of other components, the CPU, memory, fault remains in the station, the external display is not connected to the screen, the fault remains, the motherboard DOA is suspected, and the motherboard test failure is still resolved. Finally, the computer is installed and booted. Press F2 to test whether it can enter the BIOS. It takes about half an hour to enter the BIOS and find that the hard disk is not recognized under BiOS. Finally, it is found that the hard disk is faulty and the computer boot card LOGO. This motherboard needs to be connected to the hard disk test. Can pass the self-test. Rising Sun 125F /Zhaoyang E280S motherboard using SIS chipset, this motherboard will not appear hard disk test will appear boot card LOGO. According to the usual diagnosis ideas, it is easy to judge the mistakes, and share this experience with you. I hope that everyone can help in the maintenance process. Q: There is no obvious phenomenon when the C46X series model is turned on. A: This phenomenon is because the screw is just on the edge of the graphics card. Sometimes the screw is too tight, it will cause the video card to be invisible, loosen the screw, and sometimes need the graphics card. Reinstall and be careful not to play too tight when installing this screw. Q: IE will automatically close when you open a particular website using a browser, and IE will browse normally when you open another website. A: This is a problem caused by cookies. Removing cookies from temporary files from the IE option can be resolved. CookIE is a data file sent by the web server to the computer, which records some information about each login site. If for some reason the error message generated by the webpage is saved in the cookie, when the site is verified again, the site will cause the webpage to close when it logs in to the site. Q: After the user's machine system is damaged, use one-click recovery. "Restore the factory state" function to restore the system, after rebooting prompt: "....winload.exe..." error, can not enter the system, follow the prompts to restart invalid A: system C disk primary partition error, resulting in the system can not be prompted after recovery Find the startup program. Start with the Vista installation CD. In the partition interface, delete the C drive and create it. No formatting is required. Shut down and press “NOVO” to enter the key recovery. Select “Restore factory status” to restore the system and troubleshoot.