WinXP broadband connection prompt error 720 solution

WinXP broadband connection error 720 is mainly because the dial-up network can't coordinate the protocol settings of the servers in the network. It may be caused by the fault of the operator's server, or it may be the reason of the computer itself. Many people want to know how to encounter such a problem. Solution, the following small series will introduce you to the solution of WinXP broadband connection error 720.

Fault Tip:

Error 720: Cannot establish a connection to a remote computer. You may need to change the network settings for this connection. For more assistance, please click “details” or find this error number in the Help and Support Center. (FIG. 1)

FIG. 1

Faulty:

1, the computer system cause program failure.

2, broadband connection properties, under the network label "Internet Protocol (TCP /IP)" rdquo; no choice.

Solution:

1. Create a new broadband connection.

2. Reinstall the operating system.

3. In the broadband connection properties, under the network label, "Internet Protocol (TCP/IP)" has no solution:

a, right click "ldorts" ”, left click on <;Properties> (Figure 2), open “network connection”.

FIG. 2

b, right-click & ldquo; & rdquo ;, broadband connection left click & ldquo; attribute & rdquo; (FIG. 3), open & ldquo; broadband connection property & rdquo ;.

Figure 3

c, select & ldquo; network & rdquo; tab under & ldquo; Internet Protocol (TCP /IP) & rdquo ;, click the & ldquo; OK & rdquo; can be.

Figure 4

The above is WinXP broadband connection error Solution 720, and can be solved by re-establish a broadband connection, follow the steps in this article describes the problem easily solved, is not it simple? Give it a try.