Unclear and fierce! Experts easily crack the obstacles of installing USB disk xp system

Using a USB flash drive to install the system is a very convenient method. It is very convenient, but there are still some obstacles when installing the system xp system with a USB flash drive. During the installation process, the user often receives a prompt NTLDR is missing piess any The key to restart error is another headache. See how computer masters crack it.

First, put the Windows xp system image on the local disk (non-system disk, such as E disk)

Second, insert the U disk.

Third, open ultraiso, open the image of winpe, click start --- write to the hard disk image

Fourth, select the U disk, click to start (it is best to format the U disk before starting )

5. After the burn is complete, click Close to restart the computer (make sure the default boot mode is U disk boot, if not, you can also manually adjust when you restart the computer)

VI. Winpe micro system.

Seven, after Winpe startup, you must remember to pull out the U disk, if you do not pull out the U disk directly installed, it will prompt NTLDR missing (I guess it is because of the U disk and our system disk (such as C drive), are active partitions, if you do not pull the U disk to install the system directly, the file will be copied when the error, so in the beginning, I put the system's image on the local disk) (this It is a key step in the legend).

VIII, next, the system image, mounted with virtual CD-ROM software (generally in the Winpe system control panel, even if the U disk has been exited, does not affect the use)

Nine, the installation process will not be repeated.

After installation, there will be no error in NTLDR is missing press any key to restart.

Installing a system can be said to be a very cautious thing. Which step is wrong, all the operations are gone, if you are experiencing similar problems when installing the xp system with a USB flash drive, hope The above nine steps can easily help you solve your troubles.