Drive the reloaded extra local connection 2? Three steps to get

When you set IP and other related information in "local connection 2", if these parameters are set in the previous "local connection" In the same way, the system will prompt the information occupied by other network cards. At this time, you can manually delete the previous connection information and convert “local connection 2” into “<quo;local connection”. The problem can be solved as follows: Br>

Step1: Enter regedit.exe in the Run box to open the Registry Editor. If it is Windows Vista or Windows 7, you may need to obtain authorization from the administrator account.

Step2: Jump to hkey_local_machine\\SYstem\\CUrrentControlSet\\COntrol\\Network\\, where you can save information about the local connection.

hkey_local_machine\\SYstem\\CurrentControlSet\\Control\\Network\\\\\\Connection is a local connection.

And hkey_local_machine\\SYstem\\CurrentCOntrolSet\\Control\\Network\\\\\\Connection corresponds to the local connection 2.

Setp3: Delete the entire subkey value corresponding to local connection 2 directly Yes, hkey_local_machine\\SYstem\\CurrentControlSet\\Control\\Network\\\\{FEF499AF-6AA7-4A0C-9049-8934F5C0322F is deleted. Considering the stability of the system, the export operation is performed before the deletion.

Log out or restart the system, and the extra local connections 2 in the system can be deleted.

Whether it is on the Internet or on the LAN, we need to start from the "local connection" to properly configure the network parameters. However, in the actual web process, we sometimes find that “local connections” may cause various inexplicable failures. For this reason, it is very necessary to learn the contents of this tutorial.