u disk boot disk installation windows xp system

computer shop news installation windows xp system is a maintenance problem we often encounter, but the use of u disk boot disk to install windows xp system but there are many tricks, let's take a look at it ! 1, u disk format: It is recommended to use more than 1g capacity u disk (because you want to copy the system and u disk boot software, so there must be enough space), first use flashboot to format the u disk into usb-hdd or usb-zip One of the two modes, I chose the usb-zip mode, which is a good support for this Malata notebook. 2, u disk version winpe: think of the pain of installing xp under dos, so prepare to use the u disk version winpe to start the xp system installation, and later the test is indeed feasible. I downloaded the old peach winpe u disk version online, there are all kinds of common tools in addition to winpe, after decompressing the files are copied into the formatted u disk. If you don't like to use the ghost installation disk on the Internet, you feel that the normal installation is more stable step by step. You can use the gohst backup after all the installations, so that you can restore it later. In addition, there are friends who are accustomed to using the ghost recovery method to install the system. Copy the image file directly into the u disk and copy it to the partition outside the c area. Use the Norton ghost32 that comes with the old peach winpe to restore the system directly to the c area. Yes. 1. Set the u disk to boot: press the f2 key to enter the bios setting after booting, and open the third usb boot option in the boot menu, that is, select enabled, save and exit the bios setting. 2, the previously prepared xp installation disk is all copied into the u disk, then insert the u disk and boot, directly into the u disk boot, the boot menu appears, choose to start the micro win-pe (by the old peach), then Entered the winpe system. Copy the xp installation disk from the u disk into the partition outside the c area of ​​the small book. I have two partitions, that is, copy it in the d area, and then directly run the setup.exe file of the installation disk folder, and the familiar xp appears. Install the interface, follow the prompts to complete step by step.