Start winxp system press F1 to enter 13 tips

Start winxp system press F1 to enter, the reason is that your BIOS settings have problems, this may also be abnormal boot system, is a fatal system failure, if you press F1, do you continue? Go on?

1. Restart the system and enter the BIOS setup. The floppy drive is set to 1.44M, but there is actually no floppy drive in the chassis. After setting this item to NONE, the fault is rectified.

There have been many people who have asked such questions. Let me summarize the problems I have encountered and hope to help everyone.

2, Hareware Monitor found an error, enter POWER MANAGEMENT SETUP for details, Press F1 to continue, DEL to enter SETUP

Chinese: Monitoring function found error, enter POWER MANAGEMENT SETUP to view details Press the F1 key to continue the boot process and press the DEL key to enter the COMS settings.

Explanation: Some motherboards have hardware monitoring functions, which can set the temperature monitoring of the motherboard and CPU, the voltage output level monitoring of the voltage regulator, and the monitoring of each fan speed when

If the above monitoring function detects an abnormal situation at the time of power-on, then the above paragraph will appear. At this time, you can enter the COMS setting and select POWER MANAGEMENT SETUP. On the right side, **Fan Monitor**, **Thermal Monitor** and * *Voltage Monitor** checks which part of the exception was issued and then resolved.

3, pri slave drive-ATAPI LNCOMPatible press F1 to Resume

It may be that your CD-ROM drive is not connected or faulty. It is best to set each IDE port to automatic in CMOS.

4, cpu has been changed please re-enter cpu settings in the cmos setup and remember to save before quit!

Some motherboards have a FSB jumper, the default is 100MHZ, also Some motherboards do not support auto-tuning. You only need to set the FSB to your CPU standard FSB in the BIOS. The multiplier is usually set automatically. It is best not to overclock.

5, Press F1 to continue, DEL to enter SETUP

After booting, press DEL to enter the BIOS. Select NONE in the floppy drive and press F10 to save it.

6 CMOS checksum error-Defaults loaded

Press F1 to contnue?DEL to enter SETUP

08/09/2000-i810-ITE8712-6A69ME1CC-00

cmos battery Electricity.

7. Try not to install the floppy disk drive, but you set it in CMOS, if you open the floppy drive option.

The method is: press the Del key, enter the BIOS settings, select the first "Basic settings", set floopy one without "Disabel" invalid.

8. At the beginning of the boot, press DEL to enter the BIOS, press Enter to enter the first item, see Look at the "Drive A" option inside is "None", if not, press "Pgup" or "PgDn" to modify it, press "<ESC" to exit, select "Save & Exit Setup" Press Enter to exit the BIOS, reboot, and then change the battery and then follow the steps above to reset.

9. Booting needs to press the F1 key to enter, mainly because the BIOS settings do not match the real hardware data, can be divided into the following cases:

10, actually no The floppy drive or floppy drive is broken, but the BIOS has a floppy drive, which causes F1 to continue.

11, originally hanged two hard drives, set up in the BIOS into a dual hard drive, and later lost one of them but forgot to change the BIOS settings back, this problem will also occur.

12, the motherboard battery is not powered, it will also cause data loss and this failure.

13, Warning! CPU has been changed! Please Enter CPU speed CMOS setup and Remember to save Before Exit!

This means that the BIOS settings have been flushed and you have to reset the BIOS (also known as CMOS settings). Press and hold the “Del” button to enter the settings and see your motherboard manual. What is your CPU frequency? In the BIOS to choose a FSB, the multiplier is locked. The FSB is always 66, 100 or 133. It depends on the CPU model and is set from low to high. If it is AWARD's BIOS setting, select Frequency/Voltage Control on the front page. Use this menu to make special settings for frequency and voltage. Among them, “Clock By Slight Adjust” allows you to select the CPU clock frequency. The BIOS settings of various motherboards are different. The laptop system can be adjusted by referring to the manual of the motherboard.