The NIC driver abnormality caused the XP system to start the scroll bar abnormally slow, the Caton

ASUS M2V motherboard, after installing the xp of the ghost package, after booting and restarting, the system cannot be entered. The xp scroll bar becomes abnormally slow after several rounds of normal scrolling, 3 The scroll bars made up of squares are displayed one by one when scrolling.

After rebooting, you can enter safe mode. If you restart multiple times, you can enter the system normally. The 10,000 words &hellip about various tests are omitted here. …

Finally, other unnecessary plugs are found. The line is removed, only the display and keyboard are connected, and the system can enter the system normally after repeated restarts. After entering the system and then inserting the network cable, the network card is always in the state of automatically obtaining the network address. It feels that the problem of the network card is more likely. The test found that the integrated Atheros chip's NIC automatic installation drive date is 2007-8-30, the driver version is 2.3.7.4.

NIC driver is updated 2009-8-20, the version 2.3.7.14, multiple reboots can normally enter the system.

The NIC driver causes the scroll bar to scroll slowly when the computer starts up, and the system cannot be started.

There are fewer NICs using the Atheros chip. Such problems are rarely encountered, and many detours are accumulated and accumulated. A little experience.