Computer reinstallation or GHOST misoperation, the result of the hard disk partition merged into a C drive, the data in the original partition is still saved? The following system home for this problem and share two ways to solve the problem of retrieving data when partitioning, I hope to help you. Example description: One day, Xiaoqiang teacher of the sports group called and said that his computer is running very slowly. Since there is no CD-ROM drive, he uses the U disk with the Chinese cabbage PE to start the reinstallation system, and manually Ghost, the U disk on XP. The gho file is restored to the computer. His computer has four divisions: C, D, E, and F. In D, E, and F, he stores his many years of teaching plans and daily materials. As a result, due to misoperation, after the restoration was completed, his computer was re-partitioned, and the D, E, and F disks were merged into one large C disk, and the original data and materials were all gone. Ask the author if there is any way to restore the original partition and retrieve the data. In this case, the author also encountered the first time, and did not have much confidence. Therefore, the author used other computers to find solutions to the situation. According to the online information, re-partitioning only mobilizes the label of the marked partition, and does not mobilize and change the physical data. The data is still in its original location! Some netizens said that DiskGenius can be solved by a hard disk partition and hard disk data recovery software. Borrowing & ldquo; machine & rdquo; raw eggs data back to life I want to re-partition just mobilized the label of the mark partition, and did not transfer and change the physical data. The data is still in its original location! Then find a partition table of the hard disk with the same hard disk partition. Is it not possible to import this hard disk? So, the author asked Xiaoqiang teacher, is this hard disk re-partitioned? He said that it was not the same as the original. Fortunately, the teachers in our school are all in one group, and the system and the partition are basically the same. Therefore, the author hangs Xiaoqiang's hard drive on the same computer as his computer but does not repartition, installs the DiskGenius software to the normal computer and runs it. In the interface of the software, select the hard disk of the normal computer, and select the “Hard Disk & Rarr; Backup Partition Table” menu to back up the hard disk partition table of the normal computer to the D disk of the computer. Then, select Xiaoqiang's computer hard drive, select “hard disk → restore partition table” menu, in the pop-up window, select the backup to the D disk's normal hard disk partition table, click “ OK & rdquo;. At this time, the four partitions on Xiaoqiang's computer hard disk are displayed, and the data on each partition is also normal (Figure 1). Of course, the way I think this method of restoring partitioned data is purely coincidental. If it is a home computer or other computer, what if there is no similar partition? The desire to explore has once again aroused the author's fighting spirit. I think this is a good opportunity to learn and to challenge myself, so that I can safely and boldly try to deal with various methods of computer systems. So, I found a computer and merged its hard disk partition into a C drive, and then carefully tried to restore the data of each partition on its local machine. I did not expect to use DiskGenius software for partitioning and data recovery on this machine. The process of restoring partition data specifically is as follows. Press “step" to restore the data. First, use the U disk that just installed the Chinese cabbage PE to start the computer and enter the WinPE system. Then, double-click the DiskGenius program on the running desktop, enter the interface and select “Tools → Search for lost partitions (rebuild partition table)” menu, select “ld hard disk” in the pop-up window, and then click “Start” Search & rdquo; button (Figure 2). When searching for a partition, the window will prompt to keep it. You can double-click the partition to view the files inside, whether the directory is what you want to find. After verifying, click “Save”, and the software will quickly display the partition information of other partitions. , always click "reserved", so that in addition to the C drive, the partition information of other system disks (D, E, F) have been found back (Figure 3). By observing the DiskGenius interface, we found a horizontally placed cylindrical strip. All the discs except the C disc were filled with blue, and the C disc was gray. We choose the gray part. Because, I don't need the C drive information, so I right click on the gray part and select “ delete partition & delete the C drive partition. Then select the gray part and right click on the new partition. The gray area changes to blue, select the part just generated (that is, the leftmost part of the blue cylinder), right click, set the part partition as the main partition, and be active, as the boot disk. Click Save Partition Table (F8). This way your system's partition table has been changed. The things in the C drive just set are all lost. The data of other discs has not changed (Figure 4). This article comes from [System Home] www.xp85.com