In the LAN, printer sharing or some network settings, you will often need to use static IP. Today, I mainly teach you how to set the IP address of the latest Win10. The IP address here is the static IP address of the computer, and the IP address of the computer in the LAN.
Win10 set local static IP method Steps:
First step: First in the network icon in the lower right corner of Win10, right click the mouse, in the pop-up menu, click to enter “ open network and sharing center ”, as shown.
Step 2: After opening the network and sharing center, click on the network name that has been connected on the right side, such as the WWW.PC841.COM network in the figure, as shown in the figure.
Note: The small series uses the wireless network. If it is the local network of the network cable, click on the local network or click on the left side of the "Change Network Adapter", and then find the current computer network, in its Right click and select properties, the same is true.
Step 3: In the next open network status interface, click “properties & quoquo;, as shown.
Step 4: In the network property interface, then click to select "Internet version protocol 4", select and then click the "attribute" attribute, then you can play Win10 static IP address setting interface, such as Figure.
Win10 set the local IP address Note:
here, and set the Win10 static IP address is very simple, in the conventional, first select the & ldquo; Use the following IP address & rdquo ;, this It is the place where the local IP address is set. Here, it mainly includes three setting options: IP address, subnet mask, and default gateway. These three items cannot be filled in randomly, and need to be determined according to the gateway information of the local area network.
The IP address is the static local IP address that we need to set. This address should be set according to the gateway address. The subnet mask does not need to be filled in. Just fill in the IP address and click the subnet mask below. The box will be automatically generated, and the default gateway is equivalent to the router login address. Here is a simple tutorial on how to get the computer's local IP address, sub-mask and gateway information for everyone to fill out.
1, use the Windows + R combination shortcut to open the run dialog, then enter the command cmd and then click the "OK" button to open, as shown.
2, in the open cmd command box type input command: ipconfig is completed, press the Enter key to run, after which you can find the current IP address, subnet mask, default gateway and other information, as shown.
Record the default gateway address here, as shown in the figure below, the default gateway address is 192.168.1.1, the automatically obtained IP address is 192.168.1.101, the subnet mask does not need to be managed. After understanding this information, we can set the Win10 local IP address, as shown below.
The default gateway fills in the same as above, the above IP address, according to 192.168.1.* (* represents the variable that the user can change, the value can be any number from 2 - 254, be careful not to work with other computers The IP address is the same, otherwise there will be conflicts, resulting in network errors. For example, the IP address set by Xiaobian is 192.168.1.110. After the completion, click OK at the bottom.
It should be noted that the static IP address is set. The following DNS address also needs to be set manually. I don't know if I can fill in the friends. I can write the global 8.8.8.8 and 8.8.4.4, or I can fill in the Alibaba Cloud public DNS address. Or Baidu public DNS.
Of course, you can also fill in the DNS address recommended by the default operator, view the method, please read: dns address how to check the Win10 computer DNS address query method.
The above is Win10 set IP address method, the introduction can be said to be very confident, I believe that every computer Xiaobai students can learn.