Win7 system boot blue screen code 0x00000f4 how to solve

blue screen fault map:

Cause analysis: blue screen code 0x00000F4 may be a hardware failure, generally may be caused by a faulty hard disk or memory, but it is not certain, Sometimes a few are caused by other reasons, it is recommended to use the following steps to eliminate and solve the problem.
1. Check if there is any reinstallation or upgrade of the driver or BIOS recently. It is likely that the driver is incompatible. Uninstall the original driver, especially the graphics card and motherboard driver.
2. If running the software causes an error, it is recommended to reinstall the software and confirm the problem. If the software is not compatible with the system, then you need to uninstall and replace the operation;
3, check if other software runs at the same time and cause conflicts. , or the host configuration memory is too small, causing memory overflow or exhaustion (you can try to increase the memory validation problem and solve the problem);
4, after the first three points are excluded, then it may be a hardware problem, to determine whether it is hardware If the fault occurs, it is recommended to format the hard disk, reinstall the system, see if it is normal, remove the virus and system related faults;
5, mainly check the hard disk and memory, check whether the memory metal strip is oxidized, if more than two memory is installed, remove One or another memory slot, other motherboards, power supply, heat dissipation, etc. should also be checked.