How to set the ip address

xp under the win7 system and the win7 system to set the ip address is somewhat different, but what? In fact, the principle is similar, that is, the operation steps are slightly different.
The following is to share with you how to set the ip address in the win7 system.
There is a network shortcut button in the lower right corner of the computer ‘click the icon & rsquo;, open a menu, and then select “Open Network and Sharing Center 

Open a dialog box, select the adapter here. Settings

Find your local connection, right click, pop up a menu, then select Properties

Open Properties dialog box, we select “ipv4”, then click the Properties button
< Br>Check here “ use the following ip address & rdquo;, then you can enter the ip address below, click the OK button

If you are so troublesome, you can set ip in the command, Open the Run window in the Start menu

In the dialog that opens, type cmd and click the OK button

In the command that opens, enter the code shown below
Netsh interface ip set address "local connection" static 192.168.5.36 255.255.255.0 192.168.5.1 The meaning of the auto
code is to modify the following information with the command line:
IP :192.168.5.36
Code: 255.255.255.0
Gateway: 19 2.168.5.1