Win7 ADSL network connection and dial-up connection setting method

win7 dial-up Internet setting method.

1, with router link: ADSL MODEM——router——computer:

A, in control panel ——network and share center——change adapter Set —— local link to set the IP, generally set to automatically obtain the IP, the router will automatically assign the runtime IP address to the computer. As shown in the following figure 1

B, router settings

Method: Connect the router, enter the IP address of the router in the browser (generally TP-LINK is 192.168.1.1, D-LINK is 192.168.0.1 Others can enter ipconfig in the running CMD to view the IP address of the gateway), enter the login account and password of the router (default is admin, it is best to change this password after setting), most router settings interface as shown below Figure 2< Br>

The picture above is a screenshot of the management interface of the TP-LINK router. You can enter the online account and password (your online account and password) in the network parameter ——WAN port settings, below Choose automatic connection.

C, after setting, confirm whether the router can connect to the network normally. Click on the webpage to try.

2, if the user only has a single machine at home, you do not need to use the router, you need to dial the PPOE settings on Win7,

Set as follows:

A, in In Figure 1, —— click to set up a new connection or network. Then select the first item "Connect to the Internet" (below Figure 3)

Because the machine is connected to the network, the following interface appears (below Figure 4)

We choose “ still need to set up a new connection, (below Figure 5)

Select broadband PPOE connection (below Figure 6)

win7 dial-up connection input Click and connect your online account and password.