What should I do if the win7 system cannot enter the router settings?

The user of win7 system reflects that the input router address cannot enter the router setting page. What causes the router interface to be inaccessible? There are many possibilities for not entering the middle interface. First, we must first confirm that the router is not damaged and then follow The following reasons and solutions to rule out, share the solution below

1, first connect your computer and router into the network, the ADSL cat out;

2, then your IP address Set to 192.168.1.10 or 192.168.0.10, subnet mask 255.255.255.0, default gateway 192.168.1.1 or 192.168.0.1, set the DNS to your own location, and then click OK;

3 Then enter 192.168.1.1 in the address bar of the IE and press Enter. The screen prompts you to enter the username and password. Fill in the default 啲 username and password of the router or open IE browser again;

Enter 192.168 in the address bar. After 1.1, press Enter. The screen prompts for the user name and password. Fill in the router default 啲 username and password to see the manual. Try your router address to set.

4, after entering, the router setup wizard will pop up. If it doesn't pop up, it will be fine. Click on the left side and click the setup wizard. On the right, the welcome message will appear. Click “Next”. Br>

5, to select "ADSL virtual dialing", and then click Next;

6, enter your username and password, you must enter the username you use when dialing with ADSL and Password, and finally click Finish.

7, when the router 192.168.1.1 can not be opened, you can also solve the problem by restoring the factory default. You can initialize it by pressing a small hole from the top. Restore the factory default settings, and then reset the router. Others can be operated according to the setup wizard without setting. If it is ADSL, you should choose PPPOE. Then enter your online account and password.