Win7 system router can not enter the solution

1. First connect your computer and router to the network, and put the ADSL cat out;

2. Next, set your IP address to 192.168.1.10 or 192.168.0.10, respectively. Netmask 255.255.255.0, default gateway 192.168.1.1 or 192.168.0.1, DNS is set to your own place, then click OK;

3, then enter 192.168.1.1 in the IE address bar and back Car, the screen prompts to enter the user name and password. Fill in the router default 啲 username and password or then open IE browser;

Enter 192.168.1.1 in the address bar and press Enter. The screen prompts for the user name and password. Fill in the router default 啲 username and password to see the manual. Try your router address to set.

4, after entering, the router setup wizard will pop up. If it doesn't pop up, it will be fine. Click on the left side and click the setup wizard. On the right, the welcome message will appear. Click “Next”. Br>

5, to select "ADSL virtual dialing", and then click Next;

6, enter your username and password, you must enter the username you use when dialing with ADSL and Password, and finally click Finish.

7, when the router 192.168.1.1 can not be opened, you can also solve the problem by restoring the factory default. You can initialize it by pressing a small hole from the top. Restore the factory default settings, and then reset the router. Others can be operated according to the setup wizard without setting. If it is ADSL, you should choose PPPOE. Then enter your online account and password.