How to set up graphic tutorial for Win7 system router

1 Same as other systems, first open the browser and enter 192.168.1.1 pop-up

Enter the account admin, password admin (here refers to the default username and password)

2Enter the username and password. After the verification is successful, the WEB management interface will pop up

3Select the Internet access mode (PPPOE, dynamic IP address, static IP address), click Next

4Enter the account and password provided by the operator. , click Next

5 Enter the wireless setup wizard interface, enter the SSID number and PSK password, the other is the default, click Next, the setup is complete, save it.

6 Set the local IP address to be obtained automatically. If the router adopts DHCP to automatically assign IP address mode, the following settings need to be made on the computer:

Click the network icon in the lower right corner, as shown in the figure

Enter the network sharing center, change the adapter settings. Go to the Local Area Connection Properties dialog box and start setting the local IP address to automatic acquisition.

As shown in the figure above, after the setting is completed, click Save.

Summary: Win7 system's Internet access mode is basically the same as XP system. If you are not familiar with Win7 system, you can learn how to set up the router under Win7 system. In fact, the setup is very simple, and you can easily surf the web in just a few simple steps.