Analysis of 9 possible causes of hardware crashes caused by hardware

The computer provides users with great convenience in their work and study, but the computer's "dead" is an unsolvable problem for ordinary users. Below, the ink dye warm heart is based on the computer with the deep Win7 Ultimate system, and teaches you to judge whether the computer crash that installed the system is caused by hardware.

1. The device does not match. If the main frequency of the main board does not match the main frequency of the CPU, that is, the frequency of the main board is too high or too low, which may cause frequent crashes. Therefore, it is necessary to check whether the frequencies of the devices match.

2. Software and hardware are difficult to be compatible or incompatible. For example, when running Photoshop, AutoCAD and other software, the AMD K8 CPU will be better than the old Celeron CPU.

3. The motherboard, card are not in good contact, loose, or the slots, display card, memory, CPU and other accessories are damaged.

4. The voltage is too low or too high, which may be due to a power failure or an external voltage instability.

5. The hard disk has bad sectors, bad sectors or bad clusters, the disk is aging or due to unstable external power supply.

6. CPU cooling is not smooth or overclocking too much.

7. Insufficient reading ability of the head or the optical head, and poor working environment can lead to a decrease in the reading capability of the magnetic head.

8. The memory module is faulty or has insufficient capacity, such as loose memory, virtual solder or the quality of the memory chip itself.

9.Because some of the accessories have been damaged, the plug-and-play technology allows the system to detect these devices at startup and cause a crash.

[Editor's comment] The above is the 9 major possibilities of hardware crashes caused by hardware. You can check them according to the above 9 possible reasons.