Win7 system boot error message 0XC000000F how to do?

There are a variety of error codes in the process of using the computer. Recently, a Win7 system user has reported an error message 0XC000000F in the boot, what is going on? In fact, this is caused by the loss or damage of the startup file. So how do we solve this problem? We can use the Win7 system CD to rebuild the BCD file to solve this problem. The following small series for everyone to introduce WinA system boot error error 0XC000000F specific solution.

Symptom:

Windows failed to start, error code 0XC000000F, as shown:

Analysis:

This is usually due to an error The boot file is missing or corrupted.

Solution:

You can use the Windows 7 System CD to rebuild the BCD file to resolve this issue.

1, the CD-ROM into the drive Windows 7, set to boot from the CD, as shown in FIG 1:

2, see & ldquo; Press any key to boot from CDDVD ; & rdquo; or press any key to start from the optical disk, briefly press any key on the keyboard as shown in FIG 2:

3, selected repair computer, FIG 3:

4, if the system recovery option appears repair and restart button, you can try this way to solve it (in most cases, you can boot normally), if you still can't start after the operation, please restart again. FIG 4:

5, system recovery options window, click on the command prompt, FIG. 5:

6, the command input window sequentially BOOTREC /FIXMBR, press Enter; enter BOOTREC /FIXBOOT, press Enter; enter BOOTREC /REBUILDBCD, press Enter, follow the on-screen prompts to select y operation, and finally enter exit to exit the command line window, as shown in Figure 6:

7, restart the computer, the system should be able to boot normally .

The above is a small series for everyone to introduce the Win7 system boot error prompt 0XC000000F solution. If you encounter the same problem, you can follow the above steps. After the operation is completed, you will not be prompted again.