What should I do if the computer is not turned on and the host has a small long beep?

  

What if the computer does not turn on the host with a small long beep?



The operation steps of the computer starting to sound long sounds are as follows:

1. Turn off the power

, remove the memory module, and clean it with a leather tiger. Look at the memory slot on the motherboard
.

2. Use the eraser to erase the gold finger of the memory stick and insert the memory back into the memory slot of the motherboard. During the insertion process, the thumb of both hands should be evenly applied, and the memory should be pressed into the slot of the motherboard. When the "click" sound is heard, the memory has been properly loaded with the memory card slot, and the memory is successfully installed.

3. Turn on the power and start the test. The computer successfully self-tests and enters the operating system downloaded by the system, indicating that the fault has been eliminated.

The above analysis and solution to the reasons for the constant sounding of the start-up, I believe that users can easily handle the fault. Mainly because the memory is not plugged in or the problem caused by poor contact, we just need to solve the above steps.






Copyright © Windows knowledge All Rights Reserved