The computer has a problem

The computer has a problem



1. Download a PE production tool on another computer and make the U disk into a U disk boot disk (PE tool recommended) PE Toolbox).

2, then restart the computer, press the hotkey (usually DELETE, F11, F12) to enter the BIOS system, set the boot sequence in the BIOS system, and adjust the U disk boot disk to the first one. You can enter the PE system. When entering the PE system selection interface, select the latest PE system, and then wait for a while to enter the PE system.

3, after entering the PE system, press win+R, run cmd, enter the command "chkdsk c:/f" (command check and repair the hard disk error, if the report exists Bad Track), please Check and repair using the inspection tools provided by the hard disk manufacturer.) The command may take a long time and wait patiently for a while.



4, wait until the end of this command, pull out the U disk, restart the computer. We will find that it is still not in the system at this time, because the hard disk has to be self-checked, and it will be OK after the self-test is completed.






There is a problem with the hard disk. Need to repair the bad track or replace it!

You can also reinstall the system!





Re-inserting memory, not reinstalling the system






Desktop'?

Or portable?







Reloading the memory module