How to use

for Win7 system Intel MY WiFi technology 1. Enter the control panel network and internet options.

There is an Intel wireless tool in the network and internet options in the control panel. This tool is usually installed when we buy a computer. If you don't have one, you can go to the official website to download it.

2. After entering the my wifi tool, click the Open button.

There is a green enable button on the right side of the my wifi tool. At this time, your WIFI is not enabled. You need to click Enable.

3. Configure WIFI information.

Once enabled, click the Enable Configuration button below to configure it. First, after entering, click the Edit button, then you will enter a wireless network configuration interface, enter the name of the network to facilitate other devices to identify your computer, enter the security and select the encryption method to enter the password.

4. Set up sharing.

Filtering network traffic:

1) Once enabled, communication between the Intel® My WiFi technology network and other WiFi networks that may be connected to the laptop will be blocked and its devices Will not be visible (and internet connection sharing will be disabled).

2) Once disabled, the two networks will be bridged, allowing devices on these networks to communicate with each other.

5, to carry out WIFI connection.

After the configuration is complete, click OK to complete the WIFI settings. At this point, you can connect to your computer through other communication devices.