Win7 system Internet Explorer can not display the page how to do

First, remove the "Automatically detect settings" check box

1, open the Internet Explorer browser, click in the upper right corner “ Tools ——Internet Options”.

2. Switch to the “Connect” tab.

3. Click the "LAN Settings" button.

4, remove the <; automatic detection settings & rdquo; check, click & ldquo; OK & rdquo;.

Second, assign IP address and DNS server

1. Click the network connection icon in the lower right corner of the taskbar to open the network and sharing center.

2. In the active network, click “Local Connections”.

3. Click the “Properties” button in the Local Connection Status screen.

4. Switch to the "Network" tab and double-click Internet Protocol Version 4 in the list of connections using the following items.

5, <;General” tabs use the following IP address, fill in the IP address and DNS server provided by the network operator.

Third, re-register Internet Explorer DLL file

1, save the following command code as a 1.bat batch file.

regsvr32 actxprxy.dll mobsync.dll asctrls.ocx msapsspc.dll cdfview.dll mshta.exe comcat.dll mshtmled.dll comctl32.dll msident.dll corpol.dll msieftp.dll cryptdlg.dl msnsspc.dll digest .dll msr2c.dll dispex.dll msrating.dll dxtmsft.dll msxml.dll dxtrans.dll occache.dll hlink.dll oleaut32.dll iepeers.dll plugin.ocx iesetup.dll pngfilt.dll imgutil.dll proctexe.ocx inetcpl.cpl Scrobj.dll initpki.dll sendmail.dll inseng.dll setupwbv.dll licmgr10.dll tdc.ocx mlang.dll webcheck.dll

2, double-click to run the batch, if successful registration will prompt the following dialog box, If you are prompted by another dialog box indicating that the file is damaged or missing, please confirm one by one.

3. If the Internet Explorer DLL file is damaged or missing, please copy the relevant file to a normal computer or reinstall the Internet Explorer browser.

Fourth, the Winsock registry key is corrupted

Run the netsh winsock reset command in the command prompt window to fix Winsock.

V. TCP/IP is corrupted or some configuration has been changed

At the command prompt, type “netsh int ip reset filename.txt” to reconfigure TCP/IP settings.