How to install or reinstall Windows7

Description of problem How to reinstall or update windows7

Solution Because the installation system needs to format the hard disk, in order to avoid the loss of important data, please put the important information on the hard disk in advance. Data is backed up. The data that needs to be backed up includes: Personally written documents, emails, etc. Important pictures, music or video materials IE's favorite contents Various data and reports generated by office software Program installation files (no discs only backup important on the hard disk Program installation files)
I. Update installation You can upgrade or perform a custom installation. The upgrade will preserve your files, settings, and programs (this is the easiest way to install Windows). Custom installations do not preserve your files, settings, or programs. You can use a custom installation to completely replace your current operating system or install Windows on a specific device or partition of your choice. The basic steps to install Windows are: 1. Open your PC. 2. The installer should start automatically. If not, click the Start button and then click Computer to open the Windows 7 CD-ROM in the DVD drive and double-click setup.exe. 3. On the "Install Windows" page, click “Install Now”. 4. On the “Get Important Updates for Installations” page, we recommend obtaining the latest updates to help ensure a successful installation and protection of your computer from security breaches. During the Windows installation process, your computer needs to be connected to the Internet to get these updates. 5. On the “Read License Terms” page, if you accept the license terms, click “I accept the license terms & rdquo;, then click “Next”. 6. On the “What type of installation do you want to make?” page, click “Upgrade” or “Customize”. You may see a compatibility report. Continue to follow the instructions to complete the installation of Windows 7. Second, the CD-ROM boot installation program 1. Set the CD-ROM drive: Insert the installation CD into the CD-ROM drive, restart the computer, when the boot LOGO appears on the screen, press the "F12" key on the keyboard, select “ CD/DVD (representing one of the CD-ROM drives), press the Enter key to confirm. 2. Select the CD-ROM drive. After a few seconds, the words “Press any key to boot from cd…” will appear on the screen. You need to press any key on the keyboard to continue the CD-ROM drive. As shown below: 3. After the CD-ROM drive is booted, the following interface will appear continuously: 4. Keep the default state here, “language to be installed> select“Chinese (simplified)”,“time and Currency format & rdquo; select “ Chinese (Simplified, China) & rdquo;, & ldquo; keyboard and input method & rdquo; select & ldquo; Chinese (Simplified) - American keyboard & rdquo;, click & ldquo; next & rdquo;. 5. Version selection, depending on the version of the factory random system, it may be slightly different here, just click “Next” 6. Agree to the license terms, check ““ I accept the license terms (A)”, click Next. 7. Enter the partition interface, click “Drive Options (Advanced)" 8. Click “New (E)&rdquo ;, create a partition 9. Set the partition capacity and click <; next & rdquo;. 10. If you are re-creating all partitions after a new hard disk or deleting all partitions, Windows 7 will automatically generate a 100M space to store the boot file of Windows 7, and the following message will appear, click “OK” . 11. Create a disk state after the C drive, then you will see that in addition to the created C drive and an undivided space, there is a 100M space. 12. Create the remaining space as you did above. 13. Select the partition where you want to install the system and click “Next”. 14 The system starts to automatically install the system. 15. After completing the “Install Update”, it will restart automatically. 16. The Windows startup interface appears. 17. The installation program will continue to install automatically. 18. Here, the installer will restart and host again. For some tests, these processes run completely automatically. 19. After the test is completed, the user name setting interface will be entered. Enter a user name 20. Set the password. It should be noted that if you set a password, the password prompt must also be set. If you feel trouble, you can also set the password without going to the password, click “> next” to enter the system and then go to the control panel? D user account. 21. Set the time and date, click “Next” 22. System Will start to complete the setup and start. 23. If the password is set in the password setting interface, the login screen will pop up, enter the password you just set and confirm. 24. Enter the desktop environment, the installation is complete