Cajviewer 7.0.2 fails to start under Win7 How to solve

  

The current version of CAJviewer does not fully support the vista and win7 operating systems. Before the new version of CAJviewer is released, readers are requested to adjust it themselves by following the steps below.

How to use Cajviewer 7.0.2 Vista Currently, the latest version of Cajviewer 7.0.2 does not support Vista, and it is fully supported to version 7.0.3.

How to use Cajviewer 7.0.2 Vista:

1. Install CAJViewer 7.0.2.self.exe, it can't run after installation, prompt; ReaderEx.dll is not running.

2. Unzip CAJViewer 7.0.2.self.exe

3. Open the unzipped folder, locate CAJViewer 7.0.21.cab, and extract the file.

4. Locate readerex.dll and sysinfo.dll in the extracted folder and copy the 2 files to the c:\\windows\\system32\\ folder.

5. Press Win+R to bring up the Run window and execute the following four items in order:

regsvr32 /s /uc:\\windows\\system32\\sysinfo.dll

regsvr32 /sc:\\windows\\system32\\sysinfo.dll

regsvr32 /s /uc:\\windows\\system32\\sysinfo.dll

regsvr32 /sc:\\windows\\system32\\sysinfo.dll< Br>

At this point, you can run Cajviewer 7.0.2.

CAJViewer Win 7 can not start the solution summary

1, during the installation process stuck in a certain place, can not continue to install. Double-click the installed CAJVIEWER program, the screen flashes and the interface cannot be opened, but there is a display in the process. Solution: Start - run services.msc, open the system service, enable “Server” this service.

2, install cajviewer under windows7 prompt readerex.dll lost first search for x:\\windows\\system32\\ whether there is readerex.dll file, if not, then reinstall the program or find it in the cajviewer directory and Put in x:\\windows\\system32\\, if so, do the following:

Start--Run--cmd, at the command prompt, type:

regsvr32 /s /ux: \\windows\\system32\ eaderex.dll

regsvr32 /sx:\\windows\\system32\ eaderex.dll

X is the system drive letter and executes the command several times. I executed it about three times. Yes, there should be a refresh process after execution, and it will take a while!

3, Other problems Try to start with an administrator account, or set the compatibility to XP mode.

Copyright © Windows knowledge All Rights Reserved