Win8 can not find the wireless signal solution

Recently, the friend pre-installed the Win8 Chinese version system, the wireless device driver is normal, but the search signal is not found. Flight mode is confirmed to be off. As shown below:

Cause analysis:
The control of the wireless network card has been added to the Win8 system settings. It needs to be enabled to connect to the wireless network.
Solution:
1. Open the charms and select “Settings”. You can use the mouse to move to the top right corner of the screen to open the charms, or you can quickly open it by pressing the keyboard <;Windows logo key"+“C” key;

2. Click “More computer settings ”--&"Wireless" menu;


3. Click “Wireless Settings"lower slider to enable wireless function;

4. The network list can search for wireless signals.

If the network list displays the following information, please check if the wireless management service (WLAN AutoConfig (WlanSvc) service) is started.


WLAN AutoConfig service method View:
right click and select & ldquo space in the taskbar; Task Manager & rdquo ;;

If the indicator is shown below brief information mode Click on <;Details";

Click on the <quo;Services" tab to find the WlanSvc (WLAN AutoConfig) service and check to see if the "Status" column is displayed "Running". ;

If the display is “ stopped”, right click on this service and select “Start”.

This method can start this service, but if the service is disabled or manually started, the service will not start automatically after restarting the computer. If you need this service to start automatically, you can click ““Open Service” to enter the service management interface, and refer to the following knowledge base to modify it to start automatically.
Operation steps:
1, open the service management interface.
You can open
in three ways. (1) Right click on the desktop computer icon, select “Manage”, click “Services & Applications>, click “Services 
( 2) Press the Windows logo key (the button on the

logo on the keyboard) and the R key at the same time to open the running interface, input services, and click OK; as shown below:

(3) Press simultaneously CTRL, Shift and ESC three buttons, open the task manager, click on the "Services" tab;

2. Find the WLAN AutoConfig (WlanSvc) service, if it is manual or disabled, right click on this service selection “Enable" (The Task Manager service displays “Start”).
If you want this service to run automatically after booting, right-click on the service and select "Properties", select the startup type as "Automatic", then click "Application", click “Enable”, Click the “OK” button to close the settings window. This will restart the computer and the service will run automatically.
The setting steps can be referred to the following figure: