Win8 system U disk capacity display 0 byte solution

U disk is one of the most used tools, U disk as our copy, storage file is the most important mobile storage device, which often stores important files. Recently, users who have a Win8 system have found that they cannot be used normally after inserting a USB flash drive. The properties of the USB flash drive are turned on, and the capacity of the USB flash drive is displayed as 0 bytes. How is this going? How do you solve such a problem? Now Xiaobian will talk to you about the Win8 system U disk capacity display 0 byte solution.

as follows:

1, if byte 0 problems, suggestions for troubleshooting U disk: Right-click the U disk drive, select & ldquo; attribute & rdquo; Item Open its properties panel.

2. In the "Properties" window that opens, switch to the "Tools" tab and click the "Check" button.

3, the next program will automatically check the U disk and fix the errors. Repair the interface as shown.

4, if the above method can not solve the problem, you need to enter the following repair operation: If there is no important data in the U disk, it is recommended to directly perform a "U-disk" on the U disk; low-level formatting & rdquo; operation: right-click U disk Drive letter, select the “Format & rdquo; item from the pop-up menu.

5. In the "Formatted Removable Disk" window that opens, uncheck the "Quick Format" item and click the "Start" button to format the U disk.

6, the most thorough solution is to use the mass production tools to mass-produce the U disk to restore the factory settings, which can be repaired by referring to other related tutorials.

The Win8 system U disk capacity display 0 byte solution will be introduced to everyone here. If you have any problems with the above problems, you may wish to try the above methods, may solve your problem, hope to help more people in need here.