UltraISO+U disk+win8 reloading system

UltraISO+U disk+win8 reloading system

Required: UltraISO, formatted U disk, corresponding win8 CD image file:

1, write the win8 installation file to the U disk:

Open the win8 image file with UltraISO, select “Start & rdquo;-"“write the hard disk image 

In this process, you may be prompted to format the U disk, click OK;

For the writing method, it is best to use the "USB-ZIP+" method.

2, set BOOST boot mode:

When booting the computer, go to the Boost settings page, select usb to start first, this different computer also has

different setting methods, For details, please refer to the information on the printed network;

Restart from the USB flash drive;

3, pay attention to pull out the USB flash drive

Generally in the installation process Need to restart several times, if the U disk is always plugged into the computer, it will cause it to boot from the U disk again every time;

So you should copy the installation file in the system and put it on the first reboot. Unplug the disk;

You should also pay attention to this problem when installing from CD.