How does the Win8 system use the Windows to go function? Win8 uses the Windows to go function method

  

The Win8 system includes a Windows To Go function. Simply put, you can use the U disk to install the Win8 operating system in a USB flash drive, and then carry it with you. The Windows To Go drive can be booted on multiple computers, and when it is first booted, it detects all of the computer's hardware and installs any required drivers. How does Win8 open the Windows to go function? The following small series will bring you the way Win8 uses Windows to go function, let's take a look.

The steps are as follows:

1. Hardware requirements:

Computer: Install Win8 operating system, CPU needs to be above 1GHz, memory space is more than 2GB, graphics card needs support DirectX 9 and WDDM 10 or higher.

Software Name:
DirectX9.0c The latest official multi-language full installation version Win9x/ME/2000/XP/2003)
Software size:
109MB
updated:
2013-02-16



2, U disk: PC USB interface is preferably Is to support USB3.0, if the computer only supports USB2.0, you can consider using a mobile hard disk instead of a u disk. Although Microsoft officially suggests 16G, the actual operation of 32G space can support the operation of the graphical interface. The lower than 32G space may only be used for command operations.

3, software requirements: Win8 enterprise original operating system installation CD or the corresponding ISO extension installation file. In the four versions of Win8, only the Enterprise Edition supports Windows To Go.

4, installation steps:

Understand the requirements of installing Windows To Go software and hardware, you can operate it. First load the Win8 operating system installation file into the virtual CD-ROM drive.

5. Then, click on Windows To Go in the Control Panel.

6, next add Win8 system image, the path is located to the mounted Win8 mirror location (drive letter), the wizard can automatically find the Install.wim file under the path.

7. In the "Set Bitlocker Password (optional)" option, if you want to use Bitlocker to protect Windows To Go from unauthorized use, you can type Bitlocker in this step. Password, so you will be asked to enter your password each time Windows To Go starts, otherwise it will not work.

8. If the password is set, you need to enter the correct password to enter the system. If you enter the wrong password, you will be prompted to restore the system.

9. Return to the previous steps. After completing the Bitlocker setup, the installation wizard will promptly delete all the data on the current drive. If you confirm, click the Create button.

10, the next wizard will release the Win8 system image to the drive, depending on the configuration of the computer, may need to wait for about 10 minutes or so (the operating system try not to do other work, so as not to make mistakes) .

11. After the system image is copied, a setup menu for the boot option selection will appear. Select No here, so the startup information will be recorded on the Windows To Go drive.

12, Windows To Go supports UEFI \\ Bios boot, so you can boot and boot directly from Windows To Go without rebooting the BIOS on the UEFI booted computer, the first run and the usual completion Like the Win8 installation, you need to initialize the detection and then enter the OOBE phase setup, which is the same as the usual Windows 8.

You still don't know how to open the Windows to go function. You can follow the above steps. There are steps to teach you. Just follow the steps to open the Windows to go function. . Thank you for reading, please pay attention to this website for more content!

Copyright © Windows knowledge All Rights Reserved