WinXP how to clean the epson (Epson) print head? epson printer nozzle cleanup graphic tutorial

Recently, users have reacted to their winxp system epson printer nozzle blocked, do not know how to do, the following small series for everyone to explain WinXP system How to clean up the epson (Epson) printhead.

Method /Steps

Open the printer and start —— set —— printer and fax machine to find the printer you are using.

After clicking on the printer to be cleaned, you can see the interface shown below, click the button shown in the red box.

After clicking, the drop-down menu pops up and select the Print Preferences button from the drop-down menu.

After clicking on the printing preferences, the interface shown below will pop up, click on the advanced button.

At this time, the interface shown in the figure below will pop up. Click the position shown in the red box below to print the nozzle detection pattern to detect the nozzle plug and compare it as a cleaning nozzle.

After popping up the interface shown below, click the Start Print button to print the nozzle test pattern and prepare an A4 paper in the printer.

Then print out the detection pattern, then click on the cleaning print head as needed.

Then the interface shown in the figure below will pop up. Click on the cleaning to start the cleaning of the print head. After the cleaning is completed, repeat the above steps to test the effect after cleaning.

The above is the method of cleaning the epson print head under the WinXP system explained by this small series. It should be noted that if the printing effect is not good after repeated cleaning, it should be cleaned for a while. In general, continuous cleaning should not exceed three times. Please ensure that the remaining amount of ink is sufficient during the cleaning process. Want to know more exciting tutorials, please continue to pay attention to this website!