How to set up router IP broadband control in Win7 system? Win7 system router IP flow control setting method

Sometimes in order to make the network distribution more uniform, we can set the router IP broadband control, the following Xiaobian and everyone share win7 set router IP broadband control skills.

Setting method:

1. First, we need to ensure that our router has IP flow control function:

2. Connect to the network through the computer, open the browser, enter the router Manage the IP in the background and enter the username and password;

3. Click the “OK” button to enter the wizard interface after verification. We click on the “IP Bandwidth Control” link on the left:
< Br>

4, then in the “IP Bandwidth Control” on the right, first check the “Enable IP Bandwidth Control” checkbox, then select your network type and set your network bandwidth later. :

5. Next, set the bandwidth and control method for each IP in the IP address segment:

6. Click “Save” after the setting is completed. ; button, display "Save configuration" information, the prompt to save the speed of the saved settings:

7, then we click on the left side of the "system tools", select “Traffic statistics”:

8, can be seen on the right To “current traffic statistics status” is displayed as "closed", we click "turn on flowmeter statistics" button:

The above is the setting of IP broadband control for win7 system router The introduction of the whole content of the method, in the LAN where multiple people use broadband together, sometimes we need to control the flow. If you don't know how to control the IP bandwidth of the router, you can refer to the above method.