Blue screen prompts the startup dump of physical memory error code after the Win7 system restarts

  

When you open a program in the Win7 system, it suddenly restarts, and then a blue screen appears. It also prompts "beginning dump of physical memory". The specific phenomenon is as follows:

Win7 Blue screen causes and solutions:

1, bad memory contact or compatibility is not good

Solution: Unplug the memory stick and use the eraser to rub the gold finger and try to install it back. No, exchange the memory slot position and try it back;

2, poor board contact or quality problems cause the device to run unstable

Solution: Shut down and plug all the hardware back. Avoid virtual connections;

3, poor hardware compatibility

Solution: This situation is common on non-branded assembly compatible machines, there is no good way to know which problems, What to change;

4, the computer heat dissipation caused the CPU or graphics chip temperature to be too high and crash, which has hardware design flaws, such as some recalled graphics card or computer components

Method: Complete dust removal machine Cooling, not to replace the fan (heat sink);

5, bad sectors of the hard disk

Solution: detect and try to repair bad sectors of the hard disk, but repairing bad tracks of the hard disk will destroy the track and its The data of the adjacent sector. Please make a data backup before the hard disk bad track is repaired to reduce unnecessary data loss;

6. If there is a motherboard diagnostic card

Solution: It is recommended to plug in, start running test If you can't solve it yourself, you need to find after-sales or professional repair.

The above is the introduction of the blue screen prompting the beginning of the error of the error code of the Win7 system after the restart of the entire content of the solution, do not need to be nervous after the blue screen failure problem, according to the above method to check.

Copyright © Windows knowledge All Rights Reserved