How to install Win10 TH2 official hard drive? Win10 TH2 official version of the hard disk installation method

Win10 TH2 official version of the hard disk how to install? The official version of Win10 TH2 released by Microsoft has been installed by many netizens. So, how to install the Win10 TH2 official hard drive? The following small series will bring you the Win10 TH2 official version of the hard disk installation method, let's take a look.

About Win10 system installation method, the simplest and fastest installation method is the local hard disk boot installation method. This method does not require other auxiliary devices such as a USB flash drive. It only needs to download the ISO image to install it quickly. It can be installed in single or dual system and can be installed with 32 or 64 bits.

Detailed steps of hard disk installation:

1. Download the soft media cube, click on the bottom right corner “Apply Daquan”, find “hard disk installation" (also available through the search box in the upper right corner) turn up).

Software Name:

Software Rubik's Cube v6.20 Officially Installed Edition

Software Size:

23.5MB

updated:

2016-07-13

2, after opening the hard disk installed, as shown in the following figure

/Picture needs to be replaced /

Follow the steps of the hard disk installation tool prompt:

1 Select the downloaded ISO image here

2 Select the image decompression partition here. Note that this is not a system installation partition, try to use other partitions. If you have only one partition on your computer, you can refer to the "Tips 1" at the end of the article to open up new partitions.

Other options are customized, use the default, and finally click “Start Install ”.

▼Click on the message below to click “Yes>

▼Select ““software installation mode” in the boot menu after rebooting (or your custom name) The option) to start the installation.

3, start installation

▲ language, region and input method settings, Chinese users can use the default, click & ldquo; next step rd to continue < Br>

▲Click “Now Install” & rdquo;

▲The installation key RHGJR-N7FVY-Q3B8F-KBQ6V-46YP4 is available here (only for professional installation, activation) Invalid), click “and click” to continue; or click “Skip” to enter the activation key after installation is completed

▲Click “Skip” There will be a version selection window, select the version you want to install and click “Next” to continue.

▲Check "Allow the license terms", click "&Next"; continue

▲Because we are currently performing a clean installation, we have to Select the second item "Custom" &

▲ If you want to replace the current system, first format the current system disk, and select this partition, then <; next & rdquo ; that is; if you want to install a dual system, select (except the current system partition and “ system reservations) other partitions, and then click "Next". If you choose to install the dual system, the system will also appear when you turn it on after the installation is completed. The soft media hard disk installation & rdquo; menu, the removal method refers to the end of the text prompt 2.

▲After that, the Win10 installer should be restarted at least twice, and wait patiently for about 30 minutes to enter the subsequent settings.

▲ After the main steps are completed, enter the subsequent setup phase. The first is to enter the product key (if the input is entered at the beginning of the installation, the interface is not displayed), after inputting, click <; next & rdquo; continue

▲ personalize Win10, you can Just click on “Use Quick Settings  in the bottom right corner to use the default settings, or click on “Customize Settings" in the lower left corner of the screen to arrange them one by one. We click on “Customize settings> to see what detailed settings are available

▲ You can select the data information you can send to Microsoft in the above options. However, be aware that if you turn off the “Location" information, the current device cannot be located (prudent devices such as tablets). Click “Next” to complete this part of the setup.

▲Select the ownership of the current device. If it is an individual user, select “I own it";Corporate and organization users can select “My organization" "click “ Next step & continue;

▲Enter your Microsoft account information and log in to Win10. If you don't have a Microsoft account, you can click on “Create one” in the middle of the screen. You can also click on the bottom left > Skip this step  to log in with a local account

▲Microsoft Account Creation Page< Br>

▲Local account creation page, similar to Win7 installation, fill in the user name and set password and password prompt (required), click “ next & rdquo; can

< Br>

▲Awaiting Win10 for application settings, users logging in with Microsoft account need to wait longer.

▲Settings are completed and directly enter Win10 desktop, installation ends

= ========================================================= Tip 1: Open a new partition

Because we want to be local The hard disk is booted, so first make sure that there are at least two partitions on the hard disk of the computer, one is the system installation partition, and the other is used to save the system installation files. If you have only one partition (that is, the system partition) on your computer, you can open a new partition by the following method:

▲Open the disk management (press Win+X) and find a larger remaining space. Partition, right click to select & ldquo; compressed volume & rdquo;

▲ Enter the appropriate size (as long as you can install the installation file, greater than 5000), click & ldquo; compression & rdquo;. Then there will be an unallocated space behind the partition you selected.

▲ Right click on the unallocated space, select “New Simple Volume", click on all the way in the window that appears. Next step & nbsp; Note that if you are prompted to convert the hard disk to a dynamic disk, it is because your hard disk is an MBR partition structure. The number of primary partitions has exceeded the maximum limit of the partition type ——4, please abandon the partition operation. Reselect an available partition to place the installation files.

Hint 2: Remove “software installation mode”menu

Open the Rubik's cube"software setup master”→system settings →multiple system settings, then delete&ldquo ;Software installation mode” menu can be.

The above is the Win10 TH2 official version of the hard disk installation method brought by this small series, I hope to help everyone.

Recommended reading: Win10 TH2 official version 10586 image download