Windows system >> Windows tutorial synthesis >> About windows

Newbie tutorial Win10 TH2 official version of the ISO image installation method Daquan

Microsoft has pushed the official version of Win10 TH2, and released the official ISO installation image. This is a summary of several commonly used Win10 system installation methods for novice friends. You can choose the method that suits you best according to the characteristics of each method.

In general, the current popular Windows 10 clean installation method is divided into U disk installation, hard disk installation two ways, for Windows XP/Vista, and non-genuine authorized Win7/Win8.1 users, or I want to experience the "Original" user of the Win10 system. In addition, genuine Windows7/Windows 8.1 users can use Win10 for free by upgrading and installing. If you are not sure about Win10 now, you can also use both systems by installing Win7/Win10 or Win8.1/Win10 dual system.

Users who have already installed the official version of Win10 can upgrade directly through Windows Update. There is no difference between the method and the installation update.

Software Name:

Software Rubik's Cube Computer V6.20 Green Free Edition

Software Size:

4.87MB

updated:

2016-07-31

software name:

Cube virtual drive V2 .26 free Soft

software size:

366KB

updated:

2015-12-20

First, the new installation of Win10 (single system or dual system)

As mentioned above, the two methods of hard disk installation or U disk installation can be applied to most situations, can be installed single system or dual system , 32-bit or 64-bit, automatically generate a system selection menu after installing multiple systems. The hard disk installation does not need other auxiliary tools, as long as your computer has a Windows operating system that can be started normally, the USB disk installation requires the help of a flash disk (U disk); note that if you want to install under UEFI Win10, please choose U disk to start the installation method.

For details, please refer to:

For users who want to install dual/multiple systems, there is an easier way, but this requires the current system and the Win10 system to be installed to be the same. Architecture (for example, 32-bit Win10 can be installed only on 32-bit XP/Vista/Win7/Win8.1 systems, as well as 64-bit). The specific operation method is as follows:
After downloading the image, open the ISO image. Win8/Win8.1 can be double-clicked directly. Win7 can be loaded with the soft disk of the soft media cube (downloaded above), as shown below.

▲Click on the right corner of the soft media cube to click on the application. Daquan & rdquo;, then find "virtual CD-ROM drive"

▲ click & ldquo; load image & rdquo;, select the downloaded Win10 image

▲ Double-click the setup in the sources folder under the image .exe

▲Alternatively, does not affect the installation process

▲Installation key RHGJR-N7FVY-Q3B8F-KBQ6V-46YP4 is available here (only for professional installation, activation is invalid) ), click and click “Next” to continue; you can also click “Skip & rdquo;, enter the activation key after the installation is complete

▲Click & ldquo;Skip” Window, select the version you want to install and click “Next” to continue. If you don't know how to choose, you can refer to: Win7/Win8.1 can upgrade the version of win10 for free?

▲Check the license terms "I accept the license terms", click “Next”Continue< Br>
▲Because we need to install dual/multiple systems at present, we have to choose the second item “Customize” to install

▲ (except the current system partition and “system reservation” Other partitions outside the partition, at least 16GB of free space, then click "Next".

▲ After this, the Win10 installer should be restarted at least twice, and wait patiently for about 30 minutes to enter the subsequent settings.

▲ After the main steps are completed, enter the subsequent setup phase. The first step is to enter the product secret. Key (if the input is entered at the beginning of the installation, the interface will not be displayed). After inputting, click ““Next” to continue

▲To personalize Win10, you can click “Last” in the lower right corner to use Set “ to use the default settings, or click "<customize" in the lower left corner of the screen to arrange item by item. We click on “Customize settings> to see what detailed settings are available

▲ You can select the data information you can send to Microsoft in the above options. However, be aware that if you turn off the “Location" information, the current device cannot be located (prudent devices such as tablets). Click “Next” to complete this part of the setup.

▲Select the ownership of the current device. If it is an individual user, select “I own it";Corporate and organization users can choose“My organization";click “Next&rdquo Continue

▲Enter your Microsoft account information and log in to Win10. If you don't have a Microsoft account, you can click on “Create a ” in the middle of the screen, or click the bottom left “ Skip this step to log in with a local account

▲Microsoft Account Creation Page
< Br> ▲ local account creation page, similar to Win7 installation, fill in the user name and set password and password prompt (required), click & ldquo; next & rdquo; can

▲ wait for Win10 Application settings, users logging in with Microsoft account need to wait longer

▲ After setting, go directly to Win10 desktop, install end
Second, upgrade installation (single system, recommended genuine Win7/Win8.1 users For the first time installation)
Upgrading the installation means migrating some of the current system (optional) to Win10 and replacing the current system. The above mentioned methods can be upgraded and installed, or can be upgraded by the following method:
We take the Win10 Professional installation as an example. After downloading the image, open the ISO image. Win8/Win8.1 can be directly double-clicked. Win7 can be loaded with the virtual CD-ROM of the soft media cube, and directly run setup.exe in the mirror root directory, as shown in the figure below.

▲Click on the bottom right corner of the soft media cube to click “Apply Daquan”, then find “Virtual Drive”, “

▲Click “to load the image”, select the download Win10 image

▲ Double-click setup.exe in the root directory of the mirror

▲If there is a “User Account Control” prompt, select “Yes” is

▲You can choose here, if time is tight, you can choose to complete the Win10 installation and then update. Click “Next" Continue

▲ After accepting the license terms, the installation environment will be checked. This may take a while, depending on the amount of software in the system you are currently using. After the check is complete, the installer will list things you need to be aware of, such as missing system features or compatibility with existing software. If there are no items to be aware of, the results shown below will appear.

▲ Here you can also change what needs to be saved after the upgrade. Click “change the content to be kept”, the following image appears

▲ Select the item to be retained, click “Next& rdquo; Continue to install

Note, no matter which option you choose, After the upgrade, the current system will be replaced by the official version of Win10 TH2. The “personal files” refers to the contents of the “Users” folder; the specific applications can be retained depending on the compatibility of these applications in Win10; if you select “Do not retain any content”, after the upgrade “Personal files" will still be saved and moved to a folder called Windows.old.

▲ After the system re-evaluates the installation conditions, it will open the “Ready” page again. Click “& Install” to display the installation interface in the above figure. If you choose to keep all content upgrades, this may be a relatively time consuming process, which takes about 1 hour or more, during which the computer will automatically restart more than twice.

▲Enter the upgrade installation interface after the first reboot
After several reboots, the system main body installation will be completed and the subsequent setup phase will be entered.

▲ After the main body upgrade is completed, the system will identify the original system account, enter the password (if any) and click “ next & rdquo; continue

▲ personalize Win10, You can use the default settings by clicking "Use Quick Settings" in the lower right corner, or you can click "<quo;Customize Settings" in the lower left corner of the screen to arrange them one by one. We click on “Customize settings> to see what detailed settings are available

▲ You can select the data information you can send to Microsoft in the above options. However, be aware that if you turn off the “Location" information, the current device cannot be located (prudent devices such as tablets). Click “Next” to complete this part of the setup.

▲For new users, a brief introduction to Win10's new application, you can select the default application in the lower left corner. Click “Next”Continue

▲Awaiting Win10 for application settings, users logging in with Microsoft account need to wait longer.

▲ After setting, go directly to Win10 desktop. End of installation
For Win7/Win8.1 users who have already subscribed to Win10 upgrade, Win10 official version download and upgrade can be completed through Microsoft's official tool "Get Windows10". After the installation process is finished, the system is automatically activated.
From Win10 official version 10240 upgrade TH2 official version 10586: (win10 preview version 10586 how to upgrade? Win10 10240 upgrade 10586 graphic tutorial)
Win10 official version 10240 users upgrade to install the new version of the method is very simple, basic operation Similar to the update installation. The specific method is as follows:
1, click & ldquo; start & rdquo; button, enter settings → update and security & rarr; Windows update
2, the system will automatically search for updates, when you see (specific update name), indicating The current system is ready to receive and install the new version
3. In the default state, the upgrade package will be automatically downloaded and installed. When the system prompts “Requires restart”, you can click “Restart now” to perform subsequent installation steps. You can also manually restart your computer for installation at the right time.
4, the upgrade process is automatic, you do not have to do anything.
5, after the installation successfully enters the desktop, you can check again in the Windows update to see if there are any patches not installed. After all these tasks are completed, the upgrade is successfully completed.