Win10 always restart how to do (illustration) win10 automatic restart solution (graphic tutorial)

First talk about the conditions of the Windows system automatic shutdown. Automatic shutdown is supported in Win98 and higher systems, that is, the shutdown is not performed by the physical switch of the power supply. Auto-shutdown is achieved through the ACPI (Advanced Configuration and Power Interface) technology supported by the operating system (of course, ACPI functions are not just automatic shutdown). ACPI is jointly developed by Intel, Microsoft and Toshiba, and can be managed by the operating system on the BIOS. This technology requires the motherboard control chip and other I/O chips to establish a standard communication channel with the operating system, so that the operating system can perform power management through the instantaneous soft power switch (MSPS: Momentary Soft Power Switch). Therefore, only in the hardware (control chip), power (ATX power) and operating system (Win98 with the help of the 諥 ┒ 諥 諥 諥 諥 諥 諥 , 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动 自动In the settings, you must set “ACPI fnuction ” to “Enabled”; you must also enable APM (Advanced Power Management).

Step 1: Click Win10 official desktop to find “this computer&rdquo Icon, right-click and select the "Properties" item from the pop-up context menu.

Step 2: This will open the "Control" window and find it on the left side. Advanced System Settings & rdquo; button click to enter the detailed settings interface. As shown:

Step 3: After opening the “System Properties” window, switch to the “Advanced” tab. Click on the "Enable and Failback" button in the "Settings" button.

Step 4: From the "Startup and Recovery" window that opens, in the “ System failure” Clear the check box to “Automatically restart” and click “OK” to complete the setting.

Step 5: If the above system is still unable to solve the problem of automatic system restart after the above settings, Then we need to make the following settings: Use “win+R”Open“Run” window, enter “msconfig” and press Enter to enter the main interface of the system configuration utility.

Step 6: In the “System Settings” interface, switch to the “General” tab, check the “Diagnose Start” item, click the “OK” button, and restart the computer.
< Br>

Step 7: When the system restart is complete, enter the “System Configuration” interface again, switch to the “Services” tab, check the “Hide Windows Service” item, and check the box. To start with the system, click “OK” to complete.