Windows system to view the local IP, gateway address 2 methods graphic tutorial

how to view the gateway address, many netizens are more clear how to view and set this gateway address, but for the relatively white users are not In particular, this article will talk about two commonly used methods of viewing computer gateways.

Gateway address check method

1, find "My Network Places" on the desktop and right click on the network neighborhood, select properties. The operation method is as follows in the car section 1-1.

(Figure 1-1 Network Connection Open Method)

2. After opening the network connection, as shown in Figure 1-2, find the local connection and double-click the local connection. can.

(Figure 1-2 Open Local Connection Status Method)

Mutual Help Network Tip: The local connection must be connected, otherwise it will not be double-clicked when it is opened. The window for the local connection status is up. If you are using wireless Internet access, there will also be a wireless network connection to double-click the wireless network connection,

3, open the “local connection status” window, as shown in Figure 1-3 below, Click the “Support” tab, and we will see an address behind the default gateway in the connection state. And this address is the gateway address.

(Figure 1-3 to view the gateway address method)

Mutual help network prompt: The gateway address may not be the same as the above picture, but the viewing method is the same, generally Is 192.168.1.1 or 190.168.0.1 This is the default gateway. Unless there are special requirements and restrictions.

4’, find and click "Details" in the local connection status, we can see more detailed network connection information as shown in Figure 1-4 below, here is the actual MAC address There is also a DNS service.

(Figure 1-4 Network Connection Details)
Gateway Address Check Method

1, click the desktop start menu, find and click in the start menu “Run”, the operation method is as shown in Figure 2-1.

(Figure 2-1 Open Run Command)

Help Network Tip: Open and start running, there is a shortcut, start button +R combination hotkey, this shortcut The keys are common to Windows systems, and the systems of Windows XP/WIN7/VIST/2003/2008 are common.

2, after entering the run window, type "ldd;cmd.exe" and then OK to open the command prompt. The operation method is as shown in the figure below.

(Figure 2-2 Open Command Prompt Window Method)

Mutual Help Network Tip: As shown in the above figure, you can directly enter cmd and then confirm, I am on The input cmd.exe mentioned before is just a complete command.

3. After opening the command prompt window, as shown in Figure 2-3 below, enter “ipconfig /all” and then add the car, there will be a lot of local network card connection information. As shown below,

Physical Address.... is followed by the MAC address.

IP Address... followed by the IP address.

Default Gateway... is followed by the gateway address

DNS Servers... followed by the DNS server

The above information is the first and the first way to view Figure 1-4 It is corresponding. You can compare it.

(Figure 2-3IPconfig View NIC information)
View gateway address off-topic

I used to use the software to view gateway and NIC information, and some Gadgets, but I personally think that it is not very practical, I will not say it. I personally prefer to use the second method to directly view the network connection information using ipconfig /all. If you are not familiar with the command, personally recommend using the first method to view the network connection information.