U disk boot disk production diagram

If you are still buying the system disk, the optical drive system is really out. After a long wait, I finally waited for the update of the JJU disk system tool. The new version of the tool has been done in both the operation interface and the product function. Great improvement, the following is a small editor to teach you how to use the new version of the tool to create a boot U disk. First, download the small series recommended "JJU disk boot disk production tool" Second, install 1. Double-click the installation file of the JJU disk system downloaded in the previous step "jjupan_2.0", run the installer. 2. Click the “Install” button on the interface to start the installation of the tool, as shown in the figure: 3. After the installation is completed, the “JjU disk loading system” shortcut will be displayed on the desktop of the computer, and the tool will run automatically. , as shown in Figure 3: Production 1. Double-click the shortcut to run the “JjU disk loading system” on the desktop of the computer. 2. Then you can choose the U disk drive letter, boot mode and system format according to your personal situation, as shown in the figure: 3. After the setting is completed, you can click “One button to make a USB boot disk” button to start the U disk. Production, as shown in the figure: 4. After the production is completed, a new window pops up, and the user can perform corresponding operations according to the prompts in the window, as shown in the figure: 5. Close the production tool, open the U disk, and can be in the root directory of the U disk. See a few important folders, as shown in the figure: This article is from [System Home] www.xp85.com