U disk loading system [graphic details] super detailed tutorial XP version (a)

U disk mounting system practical detailed tutorial graphic decomposition

So how to use the U disk system? U disk installed XP? U disk system tutorial?

You need to prepare an empty USB flash drive (note the important data in the USB flash drive, please backup it in time, preferably format the USB flash drive in advance), a Windows XP operating system installation disk (Ghost image installation version) )

Baidu search "the WinPE old peach" Builder U disk guide, download it to a computer, plug in the U disk, step by step description of the operation

according to the following illustration The old peach Winpe system production tool download address: http://www.duote.com/soft/8624.html

need to use the virtual drive, will download the old peach WinPE tool into the virtual drive!

First, load the winpeboot.iso image file
Then, open the virtual drive in "My Computer", find and open the "PESETUP.EXE" program; U disk installation system steps officially start: One step: Unzip the "Old Peach WinPE" tool, find the "STEUP" folder, double-click to open "PESETUP.EXE", and select "Grub Install/Start (U disk, mobile hard disk installation)" in the pop-up menu to enter the number "4 ", press Enter. Step 2: Next, if you have two or more removable disks on your computer, you will be asked which drive letter to use for installation. It is obvious that you should use the first Two, so enter the drive letter: "K", press Enter

Step 3: The following will format the U disk of your choice (Note: make sure you are not using the U disk Important data, after formatting, all previous data will be lost. Press any key directly according to the prompt to start formatting.

Step 4: When the system formatting process is finished, this will pop up. Formatting some data results, this means Your formatting has been successful, just click "OK"

Step 5: Enter the Grub2U boot write phase below. It must be noted that the disk selection must not be selected as the computer's hard disk, otherwise The consequences are very serious (but don't worry too much, because in theory, a partition of a computer hard disk is often much larger than our U disk capacity, it is easy to judge the U disk from the capacity), and the small 2G capacity U disk is For example, you should select a disk with a capacity of 1925M (the actual capacity of the U disk is often smaller than the nominal capacity, it is easy to judge), the optional parameters in the option should be kept empty, and one should not be checked. The default is , click "Install" directly

Step 6: You have successfully formatted and written Grub boot, press any key to continue the following operation

Seven steps: According to the Chinese prompt, the system requires to set a startup password for your boot USB flash drive (just enter: 0000, this step is essential, whether you want to, or not, you have to enter a string of passwords, otherwise you can not continue to operate ), make sure the two inputs are consistent Keep in mind the password, or any key to continue to operate

Step 8: At this point, the WinPE operating system made with U disk has been installed, and then the system is left, the same Is any key to exit

Step 9: Copy the system image file in the prepared Windows XP Ghost system CD to the root directory of the U disk or the English name folder, usually the Ghost XP image file. The suffix is: GHO, the size should be between 600M ~ 1G, if it is SP3 Ghost version then his file should be: WINXPSP3.GHO, if you do not want to copy the image to the U disk through the CD, you can also download through the Internet "Deep Windows XP SP3 Ghost version" to the U disk or hard disk specified folder. This step must be made after the U disk boot disk is successfully created! U disk loading system

Step 10: Restart the computer, press the Del key to enter the Bios settings, and change the first startup item of the computer to "From USB boot" (I believe everyone should have some knowledge of changing the Bios startup items, usually the "Startup Items" setting is located in the Advanced Bios Features option

First Boot Device priority boot disk, set the device to USB-HDD, Chinese means: Disk drive connected via USB device)

There are some common brand machine Bios startup items setting interface, which seems complicated, but they are all similar, anyway, Bios The priority startup item in the setting is set to boot from USB, otherwise use the WinPE system in the USB flash drive! Dell brand machine Bios startup item settings

IBM or Lenovo thinkpad notebook Bios startup item setting interface

HP notebook startup item setting interface

Step 11: After the first startup item is set, press F10 to save and exit, insert the created boot USB flash drive, restart the computer, and select “WinPE Mini Maintenance System” according to the boot prompt. Press the Enter key, this is the WinPE system will prompt you to enter the password, the password is the U disk password you set the first, if it is: 0000, to ensure that the password is entered correctly, it will successfully enter the WinPE mini operating system (this The system is not running on your computer's hard drive, but on your U disk.)

Step 12: In the WinPE mini operating system, is there a feeling like XP, not only that? You can also format the original computer's C drive. During the formatting operation, you should also select the C drive (system drive letter) file format, FAT32 format or NTFS format. Xiaobian recommends that you choose NTFS. Format format the C drive, you need to know more about why What, you can Baidu search for the difference between NTFS and FAT32. Before you start formatting the C drive, please make sure that your important data files are not in the C drive. Otherwise, the original data of the C drive will be lost. The following start formatting

Thirteenth Step: Click the "Start" menu, open the "Norton Ghost V11" in the program, the program starts Ghost, the next steps to install just the usual use Ghost The system is the same, the order of operation is: click "Local" - click "Partition" - click "From Image"

Step 14: Find you in the directory the system stores the image file specified U disk or folder, such as: WINXPSP3.GHO, double-click it or press the "Open" button, all the way to press the "Enter" key or select the "OK"

Step 15: When a dialog box pops up asking you to select Yes or No, select Yes. The meaning of the query is: the image file will be restored to the C drive according to your settings. After the operation is completed, the data in the original C drive will be is deleted, in short, select Yes to OK

step 16: Ghost image recovery process

step 17: wait for the recovery to complete, Ghost will prompt you: The process of cloning replication is complete, choose to continue or restart the computer, here select "Reset Computer Restart "

Step 18: return to step 10, after entering the first Bios boot entry to wait for the hard disk, restart the computer from the heavy ends, mounted Good driver and application software is OK

Note: All the data in the whole process of U disk installation system comes from U disk, you need to know that U disk data reading speed is much faster than The optical drive, so the whole process is much faster than using the optical drive reloading system, and the probability of error is very small. With the U disk boot disk in your hand, you can not only reinstall the system, but also partition, format, and act as a disk. The emergency disk saves important files. In short, the U disk loading system is only a small part of WinPE utilization.

From now on, you can get rid of the difficulty of reading the disk drive, unable to install the system without the optical drive, and easily use the U disk system.