Computer technology: How to configure Windows Server Time Server

Because the time server often encounters the client machine and needs to keep pace with the server in time, otherwise there will be various problems, especially when there is time-related triggering function. In order to solve the problem of uniform time between devices, a server can be set in the network as the reference time, and other devices synchronize time with the NTP protocol. This makes it easy to make the time difference between devices less than 1 s. NTP----- Network Time Protocol 2 Server Configuration For Windows Server 2003 and Windows Sever 2008 1) Open Firewall 123 UDP Port; 2) Enter “>gpedit.msc”; 3) Expand ““Strategy” Under "Computer Configuration", "Administrative Templates\\System\\Windows Time Service\\Global Configuration Settings"; 4) Change its status to "Allowed"; 5) Change the AnnounceFlags parameter to 5, 6) Expand “Administrative Templates\\System\\Windows Time Service\\Time Provider\\Enable Windows NTP Server” in the “Computer Configuration” under “Strategy”. 7) Change its status to “ld”; Enabled ”; 8) Start the Windows Time service in the Windows service and set the startup type to "Automatic" to complete. 3 Client Configuration Applies to Windows XP, Windows Server 2003, Windows Vista, Windows 7, and Windows Sever 2008. 1) In the running, enter “gpedit.msc”; 2) Expand “Administration Template\\System\\Windows Time Service\\Time Provider\\Enable Windows NTP Client in “Computer Configuration" ” 】 3) Change its status to “Enabled& rdquo;; 4) Expand “ under the policy" in the computer configuration & ldquo;Administrative Templates\\System\\Windows Time Service\\Time Provider\\Configure Windows NTP client  5) Change its status to “Enabled”; 6) Change the IP address in the NtpServer parameter to the time server address: xxx.xxx.xxx.xxx, 0x9; 7) Change the Type parameter NTP; 8 Start the Windows Time service in the Windows service and set the startup type to "Automatic"; 9) Double-click the "Time & Date Properties" setting dialog box in the lower right corner of the taskbar. 10) Select [Internet Time] ] Label 11) Select the [Automatically synchronize with Internet time server] option and fill in [Server] with “xxx.xxx.x Xx.xxx”. Click [Apply] and press [Update Now] to sync directly. See if there is a message "Windows is wrong when syncing with XXX", or "The clock syncs with XXX at 2013/8/27 12:12:00". 12) Click [Apply] and press [Update Now ] Can be synchronized directly. See if there is a message "Windows is wrong when syncing with XXX", or it appears "The clock synced with XXX at 2013/8/27 12:12:00" ”