network can be said to be various, starting from different angles and optimizing various systems, but these system optimization methods rarely involve the network. Setting up the function, in fact, in many cases, because the improperly set network function slows down the running speed of the system, so we have to optimize the network function.
1, shielding network sharing function
First in the Windows system "start" menu, in turn, "set" & rdquo; /& ldquo; control panel & rdquo; /& ldquo; network connection & rdquo; command to open the local computer In the network connection list window, find the “Local Area Connection” icon, and right-click the icon to execute the “Properties” command from the shortcut menu that appears. Open the Local Connection Properties Settings window;
Secondly, in the "General" tab of the window, find "This connection uses the following items" in the list box, "Microsoft File and Printer Sharing" option in the list box, and the box in the box in front of the option The tick is cancelled, and finally click the “OK” button to close the property setting window, so the system will not take time to check the network sharing content when it starts next time.
2, shield full control function
computer system will automatically search and scan the relevant shared folder in the local hard disk every time it starts, and the shared folder access attribute settings are different, then the system scans the target The time to share a folder will also be different; for example, if a shared folder is set to “read-only" permissions, the system may only need 1 millisecond to scan the shared folder, and when the file is shared When the access permission of the folder is set to "Full Control", the system may need to scan the shared folder for 1.5 milliseconds. It can be seen that when the shared folder's "Full Control" function is enabled, the system is started. Speed will also be affected to some extent. (www.xitongzhijia.net) For this reason, when we don't want our shared resources to let others edit and modify, just simply set the properties of the shared folder to "Read only", just read it, not take it for granted. Set it to "full share", after all, under this access attribute, the security of the shared folder is not only guaranteed, but also affects the system startup speed. To mask the "full control" function of the target shared folder, you can follow the steps below:
First open the system's explorer window, find the target shared folder in the window, and then use Right-click the corresponding folder icon and select the “Share & Security” command option from the shortcut menu that appears, and open the property settings window to the target shared folder.
Secondly click the “Security” tab in the property settings window to open the tab settings page. In the "Group or User Name" list box of the page, select the specific user account that you frequently log in to the system. For example, the author here chooses the "ower” account.
Next, in the "Permissions" box, select the "Complete Control" item and uncheck the box in the "Allow" box for the corresponding option, so that we can The "Full Control" function of the target shared folder is blocked, and then according to the actual access needs, open the target shared folder "Read & rdquo; permission or "write" permissions, and finally click “ Confirm the & rdquo; button, I believe that the system's startup speed can be further improved.
3, shield automatic search function
When starting a computer with Windows XP system installed, the computer will generally search for all shared resources in the LAN environment, it is obvious that this self-assertion " Behavior” also affects the quick start of a computer system. In order to improve the system startup speed, we can mask the function of the local system to automatically search for shared resources as follows:
First open the Explorer window of the local system, click the “Tools” option in the menu bar of the window. From the drop-down list that appears, click “Folder Options”, go to the folder option settings interface of the system, click on the “View” tab to open the option settings window;
find the In the window, select the "Automatically search for network folders and printers" option, and cancel the check mark in the box in front of the option, and then click the "OK" button, so that the computer system will start next time. It won't take time to automatically search for other shared resources in the LAN environment, so the system startup speed should be significantly improved.
4, shield automatic allocation function
The "automatic allocation function" mentioned here, in fact, refers to the Windows system in the default state for the local network card device automatically assigns an IP address; once the local network card If the IP address is set to be automatically obtained, then each time the computer system starts, it will take a certain amount of time to apply for a dynamic IP address that can be used by the DHCP server in the LAN network. If the DHCP server is not accessed, the computer system will try again. Repeatedly connect and access the DHCP server until the access timeout, so the system startup speed will be very seriously affected, and even the system suspended state. In order to avoid the system taking time to connect and access the DHCP server during the startup process, we only need to set a static IP address for the NIC device in advance. To assign a static IP address to the NIC device, follow the steps below: Br> First click the “Start”/“Settings /“Network Connections”/“Local Connections” command to go directly to the local system "local connection" property setting interface, in In the “General” tab of the setting interface, select the “Internet Protocol (TCP/IP)” option and click the “Properties” button on the corresponding page to open the property setting interface. In the “Use the following IP address” option, specify the IP address of the same subnet as the ADSL device address for the NIC device; for example, the IP address of the ADSL device is generally “192.168.1.1” , then we can set the network card IP address to "192.168.1.11", and set the subnet mask address to "255.255.2" 55.0”, the gateway address is set to “192.168.1.1”.
Next, use the following DNS server address, select the local DNS server's real DNS server IP address here, for example, the ISP's real DNS address is "61.172.7.1" Then, we can fill in the address here, and click “ OK & rdquo;, in order to save the above IP address parameters, I believe that the computer system will not need to spend time in the future when starting DHCP server, then the system startup speed will definitely take it to the next level.
5. Screening network mapping function
In order to facilitate quick access to the shared folder in the other computer after each boot, many people often map the other party's shared folder to the local computer through the network mapping function. a disk partition. Although this method brings great convenience to shared access, it brings a lot of influence to the startup of the system. After all, the system takes time to search, scan, and connect to the shared folder of each other every time it starts. In fact, we don't need to access the shared folder every time we turn on the phone. Obviously, the network mapping function of the shared folder can be opened at will, which will seriously slow down the startup speed of the computer system.
In order to make the system startup speed unaffected, we can disconnect the network mapping that is not used in the local computer as follows:
First use the mouse to double-click the "My Computer" icon in the system desktop. In the window that pops up, click the “Tools” item in the menu bar, and execute the “Disconnect Network Drive” command from the drop-down menu that appears, and then select one of the temporarily unused network drive partition disks. Then, click the “OK” button.
Of course, we can also use the "net use" command to achieve the purpose of disconnecting the network mapping connection. When using this method to shield the network mapping function, you only need to open the system running dialog and execute it in it. “cmd” string command to switch the system interface to the MS-DOS command line state; then execute the “net use x: /del” string command at the DOS prompt to partition the network disk into “X&rdquo” The network map connection is broken. To quickly disconnect all network map connections on the local computer, you only need to execute the “net use * /del” string command.
It is the unremitting pursuit of computer enthusiasts to improve the running speed of xp system all the time. In general system optimization can only improve a small part of the speed. Through the optimization of network function settings, it can be hidden in the dark of the system. Speed from the digging of the points, so that the system runs fast.