Hand to the disease In addition to broadband connection 769 wrong solution

Recently encountered a troublesome thing, my system is Windows Vista Home Basic, a few days ago installed Tietong ADSL broadband, the next day encountered problems. Just a few minutes after the Internet suddenly dropped, and then the connection is not connected, the title bar is "ldquo; error when connecting to the broadband connection" window, the content is roughly: can not connect to the specified target, error 769, how is this back What about the problem? How to solve this problem? Please refer to the professional staff for details:
Broadband connection error 769
Error 769: Unable to connect to the specified target.
Question: This refers to the problem with your computer's network equipment.
Workaround:
Open “My Computer”→“Control Panel”→“Network Connection”, Check if the local connection is in
“disable” status, just double-click on the local connection and see the status changes to “enabled” If there is no local connection,
then your network card is 100% problematic —— not installed or broken. Please contact your computer supplier or solve it yourself.
The error 769 has occurred. Most of the NICs are disabled and enabled! The cause is generally: the user's misoperation or some firewall software or computer virus is common. If the local connection is not found, the driver of the network card is lost or the computer does not detect the network card, you can reinstall it.
The error reason: the network card is disabled
Remedy: Please click the right button of the computer and select Properties. Then select device management, then look at the network card driver situation, if it is a "x", the network card is disabled, click the right button to activate the network card to solve.
Broadband Connection Error 769 Causes and Solutions
Broadband Connection Error 769 Causes
Generally, if one of the following conditions occurs, you will receive the error 769 message:
1. The network cable has been disconnect.
2. The modem is disabled.
3. The modem driver is corrupted.
4. Spyware is running on the computer, which prevents the connection.
5.Winsock needs to be fixed.
6. Third-party firewall software blocked the connection.
Solution:
To find out the cause of the problem, follow the steps below.
Step 1: Make sure the network cable is connected
Make sure the network cable is connected to the computer and modem respectively. If your computer is connected to a hub or router, make sure the cable that connects the hub or router to the modem is connected.
Step 2: Make sure the network adapter is enabled
1. Click “Start”, click “Run”, type ncpa.cpl, and then click “OK”.
2. Right click on the “local connection” icon. Click “Enable” (if this option is available).
Step 3: Reset the Modem
1. Disconnect the cable from the computer to the modem.
2. Turn off the modem. If the modem does not have a power switch, turn off the power to the modem.
3. Wait for two minutes.
4. Turn on the modem and connect the cable from the computer to the modem.