How can I make the computer faster after reinstalling the system? (2)

Fourth, use "safety" software with caution

The security software mentioned here refers to real-time anti-virus software and firewall. This kind of software is very large for system resources and CPU resources (somes are more than 30%). If you don't often go to the website, this kind of software is completely unnecessary! This is much more practical and convenient than overclocking the CPU! :)

V. Reduce unnecessary random startup procedures

This is a common problem, but many friends do not know what programs can be banned, and what can not be banned, so Many people have not done this step. It is much simpler to have the optimization master. In the "boot speed optimization" of the interface, the optimization master will prompt you what can be banned and what can't be banned!

In addition to speeding up the startup speed, it also improves the stability of the system during operation!

Six, reasonable settings "icon cache"

Usually the system default icon cache is relatively large, which is obviously a waste of feeling, so we have to make the appropriate adjustments, We can use "Windows Optimizer" to see how many icon caches the system has used, and then we will set its value to about 2 times the actual size. Note: Some computers may not be able to be modified using the Optimizer, in which case you can use the "Super Rabbit Magic Settings" to modify!

In addition, the desktop background should not be too complicated (recommended to be "no"), and some friends have also made an animated desktop, this practice has no practical significance, except that it will bring the system There is no good effect outside the stability factor - after all, we only have a small amount of time to face the desktop!

VII, reasonable setting of "disk cache"

The system defaults are usually very conservative, so we have to make some modifications, we can also modify them in "Windows Optimizer" However, we only need to manually enter the number. The minimum value of the disk cache can be set to 2048 (KB), the maximum value is set to 25% of the physical memory, and the buffer read/write unit is 512.

Note: This practice will bring great benefits to the stable operation of multimedia software, especially the minimum setting is not too low!

Eight, try to streamline the right-click menu

Many programs will leave a shadow in the right-click menu after installation, many of which are not used by us, but they give us the system Brought a burden. To do this, we can streamline the right-click menu in software such as "Super Rabbit Magic Settings", usually just keep the usual ones! In addition, you'd better delete the useless items instead of just removing the small tick in front of them! This can effectively reduce the loss of response caused by the "new" menu!

IX, the appropriate display refresh rate and resolution

Some friends always complain that their graphics card is too bad, some graphics cards are indeed poor, but in many cases are because of the display The "illusion" caused by the refresh rate being set too high. Usually 15, 15 inches of color display will set the refresh rate to 75Hz or more (if the bandwidth is enough, of course, it can be higher), there is no need to force too high. The resolution is also the same. It is usually set to 800×600 or 1024×768. As long as it is enough, there is absolutely no need to play “ultimate” and “ash”. In this way, the speedup effect of the hyperband is much larger than that of the graphics card!

Conclusion

In summary, when you use the method of this article, you will find that the system is much faster than before! And it is much more stable.