Windows XP system, a case of startup failure

A friend called to say that his Win XP added a password to the superuser administrator. When entering the interface at startup, it was very slow. After listening, it felt that the failure should not be related to the password. Going to the friend to see the phenomenon, it is time to "Windows is starting the ……” interface will not move. Since I didn't think it was related to the password at the beginning, I changed a lot of settings after entering the security mode. It took a lot of twists and turns, and finally finally solved. The XP is set to automatically log in. After adding the password, it can't be entered. Afterwards, it will be tested on other Win XP. After the password is added to the administrator in the automatic login system, the above phenomenon occurs. . I will write down the solution and hope to help people who have encountered similar problems.

1. Restart the system, press F8 before entering Win XP, select “Safe Mode”, enter the password of the administrator user and enter the Win XP interface.

2. Enter control userpasswords2 at "Start”——〉“Run”, pop up the interface of Figure 1

Figure 1

3, eg Figure 1 is selected "Use this machine, the user must enter the username and password". After the restart, the multi-user login interface appears. Select the user to enter the corresponding password to enter.

4, if you want to set to automatic login, select a user in Figure 1, uncheck "Allow to use this machine, the user must enter the user name and password", after confirming a pop-up to enter the user For the password interface, be sure to enter a password, otherwise the above failure will occur.